Specifications

Shanghai Yancan Electronic Technology Co.,Ltd.
Dual Mode Bluetooth
Param. conditions Min. Typ. Max. Unit
Out-of-Band Blocking Performance, Modulated Interferer
7
76 MHz ~ 764 MHz CDMA - -10 - dBm
824 MHz ~ 849 MHz CDMA - -10 - dBm
1850 MHz ~ 1910 MHz CDMA - -23 - dBm
824 MHz ~ 849 MHz EDGE/GSM - -10 - dBm
880 MHz ~ 915 MHz EDGE/GSM - -10 - dBm
1710 MHz ~ 1785 MHz EDGE/GSM - -23 - dBm
1850 MHz ~ 1910 MHz EDGE/GSM - -23 - dBm
1850 MHz ~ 1910 MHz WCDMA - -23 - dBm
1920 MHz ~ 1980 MHz WCDMA - -23 - dBm
Intermodulation Performance
B
T, Df = 4MHz
Spurious Emissions
3
0 MHz ~ 1 GHz - - - -62 dBm
1 GHz ~ 12.75 GHz - - - -47 dBm
65 MHz ~ 108 MHz FM RX - -147 - dBm
746 MHz ~ 764 MHz CDMA - -147 - dBm/Hz
851 MHz ~ 894 MHz CDMA - -147 - dBm/Hz
925 MHz ~ 960 MHz EDGE/GSM - -147 - dBm/Hz
1805 MHz ~ 1880 MHz EDGE/GSM - -147 - dBm/Hz
1930 MHz ~ 1990 MHz PCS - -147 - dBm/Hz
2110 MHz ~ 2170 MHz WCDMA - -147 - dBm/Hz
Note:
A
ll specifications are single ended. Unused inputs are left open. All specifications, except typical, are for
industrial temperature.
Typical operating conditions are 3.3 V VBAT and 25 ℃ ambient temperature.
The receiver sensitivity is measured at BER of 0.1% on the device interface.
Typical GFSK CI numbers at -7 MHz, -5 MHz and -3 MHz are -45 dB, -42 dB and -41 dB, respectively.
Typical QPSK CI numbers at -7 MHz, -5 MHz and -3 MHz are -46 dB, -43 dB and -42 dB, respectively.
Typical 8PSK CI numbers at -7 MHz, -5 MHz and -3 MHz are -50 dB, -45 dB and -45 dB, respectively. Meets
this specification using front-end band pass filter.
Numbers are referred to the pin output with an external BPF filter.
F0=-64 dBm Bluetooth-modulated signal, f1=-39 dBm sine wave, f2=-39 dBm Bluetooth-modulated signal,
f0=2f1-f2, and |f2-f1|=n*1 MHz, where n is 3, 4 or 5. For the typical case, n=4.
Includes baseband radiated emissions.