A. IF THE HANDSET IS ON THE BASE UNIT 1. Since the Excursion® 39765 features “Auto-Answer,” simply pick up the handset from the base cradle when the phone rings. The LCD Display will show “TALK” and the symbol ® will light steadily. 2. Start your conversation. 3. To end your conversation, either press the TALK button or place the handset on the base unit. B. IF THE HANDSET IS QUT OF THE BASE UNIT 1. When the phone rings, press the TALK button on the handset.
. Use or bunion to find the memory location you want to delete. 3. Press DEL button once and the unit asks if you want | DELETE? to delete the entered memory location. 4. Press the DEL bunion again to delete the stored phone number. DELETED! If you do not wish io delete the number, press MEMO button to cancel. B. DELETING ALL MEMORY LOCATION 1. Press MEMO button to enter your Memory Dialing MEMORY Directory. 2. Press DEL button once and the unit asks if you want to delete all memories. DELETED ALL? 3.
B. ACTIVATING THE INTERCOM USING THE HANDSET 1. Press the INT COM button on the handset. The IN USE LED indicator on the base unit will fish and the base unit will beep continuously to indicate that the Intercom function is activated. 2. The base user can respond by pressing the INT COM INTERCOM button on the base unit and start conversation. C. TO END THE INTERCOM FUNCTION USING THE HANDSET » Press the INT COM button on the handset or return the handset to the cradle to end the conversation. D.
A. NORMAL OGM « This will be played after the Excursion® 39765 answers the call. It should include instructions for the caller on how to access the individual mailboxes. For example: “Hello, you have reached 555-1234. To leave a message for Peter, press STAR and 1, now. To leave a message for Paul, press STAR and 2, now. To leave a general message, please wail for the tone and then leave your message.
NOTE: The unit returns to idle state if no mail button is pressed within 10 seconds. B. RECORDING A MEMO INTO THE MESSAGE CENTER 1. Press and hold the MEMO button. The MESSAGE CENTER LED will turn on. The unit will announce “Please record your message after the beep.” 2. While still holding the MEMO button, begin your recording. You can record up {0 a maximum recording time of two minutes. 3. Release the MEMO button when you have finished recording your memo.
2. Release the MEMO button to end your conversation recording. NOTE: Recording two-way conversations may be subjected to local state and federal laws and regulations. VOX (VOICE ACTIVATED) DETECTION During OGM, ICM or MEMO recording, the Excursion® 38765 uses VOX (voice activation) to conserve message storage space. The conditions for the Excursion® 39765 terminating a recording are: + Continuous silence for seven seconds. » Seven seconds after the caller hangs up.
SETTING ANSWER MODE TQ OFF Press the keypad # within seven seconds after the voice prompt “For help, press 9" or “Please enter the next command,” The unit will announce “Answering machine is OFF." and then it prompt, "Please enter next command.” . OGM RECORDING Press 5 and the unit will prompt, “Enter mailbox number.” Press one of the following keys: =n Nea OGM Normal Message Center) Mail box 1 OGM Mail box 2 OGM Answer only OGM ES wool 9 3.
INTRODUCTION TO CALLER ID AND CALL WAITING ID The Excursion®39765 Caller ID / Call Waiting 1D devices allow you lo take advantage of the Caller Identification delivery service offered by your local telephone company. For more information, you can refer to the following Questions and Answers table: QUESTIONS What is Caller ID? ANSWERS A Caller ID is a device that identifies tha calling party before you answer a call.
2. Find the desired Call Record to dial. 3 Press C. BACK button once to dial. The unit will dial as shown on the fable below. CALLBACK DIAL OPERATION TABLE PROGRAMMING MODE A. SUMMARY OF FUNCTION MODE Function Code Mode neighboring area code. _ 1 Language Set (English, Spanish, French) Case LED Display Number of Digits Called 2 CID CW ON/OFF Set Back 3 Area Code Set including Neighboring Area Code 1.
3. Press — or — button to change the Callback Number. 0 The Callback number scrolls Press SCAN / PRG button to save and exit. CALLBACK NUMBER E HOW TO SET RINGER ON/OFF 1. In standby mode, press SCAN / PRG button. 2. Press 5 button, or press button three times. RINGER ON The current mode is displayed. 3. Press or « button to change mode. RINGER OFF 4. Press SCAN / PRG button to save and exit. G. HOW TO SET TIME NOTE: The time set is for the LCD Display time.
:10 AM 10/10 CALL #03 BLOCKED CALL 11:10 AM 10/10 CALL # 03 OUT OF AREA 11:10 AM 10/10 CALL # 03 234-567-8901 NO NAME 11:10 AM 10/10 CALL #03 234-567-8901 JOHN SMITH * RINGING TALK m3 OUT OF RANGE MSG WAIT ON MSG ALL:10 NEW.05 BASE CALL PROGRAM INTERCOM SCREEN REMOTE 39 BLOCKED CALL The caller has purposely chosen to block his / her name and phone numbers from appearing on the Caller ID of the receiving party. OUT OF AREA The Caller Number might not be available from the caller’s area.
TROUBLESHOOTING SYMPTOMS POSSIBLE SOLUTION / CAUSE Na dial tone Check for the telephone line cord connectors at both ends that they are pushed in firmly until they click. If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. Incoming calls/ Memo messages are cut off The Excursion® 39765 will stop recording after 7 seconds of continuous silence or 7 seconds after the caller hangs up (VOX feature).
TECHNICAL INFORMATION This cordless phone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. while these are normal, the following could affect the operation of your system. NOISE: Electric purse noise is present in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electric equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses.