Specifications

Product Parameters
Support Profile: AVRCP.TS. 1.6.0, A2DP.TS.1.3.1.HFP.TS.1.7.0, SPP.TS. 1.2.1
Working Distance Range: 10m
Frequency Range: 2.402GHz-2.480GHz
Battery Specifications: 3.7V, 400mAh, Built-in rechargeable lithium battery
Charging Voltage: DC4.2 - 5.5V
Charging Time: about 2 hours
Battery life: about 15 hours
Standby Time: about 50 hours
Function Description
Power on
:
Long press
" "
, the device starts, enters the Bluetooth mode automatically
and the LED indicator flashes blue and green.
Power off: Long press" ", the device turns off,and LED is off (prompt "power off ")
Button Description
Long press: ON/OFF
Short press: Play/Pause Music Answer/Hangup Calls
Long press: next song
Short press: add the volume
Long press: previous song
Short press: reduce volume
Mode switch key: Press the M key to switch between TF Card Mode and
Bluetooth Mode (TF Card mode works only after TF card is inserted)
" " " "
" "
Mode
1)When inserting the SD Card to headset, headset automatically enters into the TF card
mode, and the headset prompts "Music".
2)If SD card is inserted, press the "M" key to switch between the TF card mode and the
Bluetooth mode.
3)TF card only supports WAV and Mp3 formats.
a.First-time Pairing:
Headset boots into "Bluetooth Mode" automatically with the voice prompting "Bluetooth
Mode" and LED indicator flashing blue and green. Without records of last connected
smart device, headset automatically enters pairing mode within 3 seconds. Please turn
on Bluetooth searching function of smart device, and connect the device named "B-06"
without password required. When paired successfully, headset prompts 'Connected ,
and its LED light turns blue.
b.Re-pairing:
Turn off the connected smart device's Bluetooth function, headset prompts Disconnected
LED indicator turns blue and green and flashes each other. If headset can't search
and pair with the last connected smart d evice w i t hin 3 se c onds, t h e headse t will
automatically re-enter the pairing mode. Please turn on Bluetooth function of another
smart device, and connect the device named "B-06" without password required. When paired
successfully, headset prompts Connected , and its LED indicator turns blue.
c.Follow-up Pairing:
Headset is automatically paired with the last connected device in 5 seconds after boot.
'
" "
" "
TF SD Card Playback Mode:
Pairing Operation of Wireless Mode:
Button Operation
1)Answer Calls: Short press when call's coming.
2)Hang up phone calls: Short press after answer.
3)Reject Calls: Short press for 2 seconds .
4)Redial the last outgoing number: Double-click .
LED Status
Charge Status
Power on Status
Power off Status
Pairing Status
Standby Status
Connected Status
Bluetooth Mode
LED turns red. When fully charged, the indicator light goes out
LED indicator light turns on Blue
LED Indicator light turns off
LED indicator light rapidly alternating flashes Green and Blue
LED indicator light turns on Blue
LED indicator light turns on Blue
In Bluetooth mode, LED indicator light keeps flashing Blue
Note
1)Battery indication on iphone and most Android Phone.
2)If the Bluetooth headset is not paired after entering pairing mode, turn off the headset
to save power.
3)Do not do anything else while searching for Bluetooth, in case the program goes wrong.
4)Please choose an appropriate volume when using to prevent damage to your ears.
5)When the volume of the headset reaches the maximum, the headset will prompt a
"beep" warning sound.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with exposure
requirements.