Contents Disclaimer & Safely Guidelines Maintenance and Care Video Tutorials Package Contents Specification Drone Diagram Controller Diagram & Usage of Trim Buttons Battery Installation Controller .
Please read the disclaimer carefully before using this product. By using It, you hereby agree to this disclaimer and signify that you have read them fury. 1. FLIGHT ENVIRONMENT: Bly In open areas Maintain line of sight Fly below 164 fest (50m) 2.00 NOT fly above or near abstractedness, cars, open watermill road, high voltage power lines, trees or import. 3.00 NOT fly the drone In the magnetic Interference area, radio Interference ares, and government registered retry ‘zones ge por, Hi FHE 4.
Please find the following ur! or scan code to watch our Q10 drone tutorial video on YOUTUBE. hits/ hit pas/ HTTP / Subscribe us on YouTube EX] x3 Drone Controller Spare Propellers | 3.
Clockwise Motor Battery Counter-clockwise Motor Propeller & Compartment Prophesier B Propeller Guard {for rear propellers) Proprietary Guard (For rear propellers) v Camera Propeller B ; ; Imbroglio 4 Counter clockwise Motor 08/8 Adjustable) Clone Motor Phone Clamp Speed Switch 30 Rips Left Control Stick.
Holbein the remote controller continuously emits the sound may a alarm showing is running out of bakery, please replace the battery of the remote controller. 2 x AAA Batteries fp] NATE Important Note: * When the drone battery runs iow. the indicator lights on the drone will blink continuously. The drone will land automatically fare about 30 seconds. * Plug the USB charging cable Into a USB charging port Power output of 5V must be used for safe charging. visage always use the usb cables provided.
2. Unfed the phone clamp T 1.Connect two guards. 2.Install the guard to the two-foot stands {one to the front stand, one to the rear stand}. 3. Tighten the screws or Just press down. . 1. Loosen the screw to remove the propeller Prophesier i 2. Fit the spear prophesier into the drone. 8 3 Tighten the screws. pier IMPORTANT VOTE: Every properer has indicated alphabet & and B. Please install the propellers in correspondence with propeller A and properer B us shown above.
Important note: For beginners, we would recommend the tail of the drone to face towards the pilot, so can better recognize the flight orientation and make operation easier ETT AT Ascend: Push up the left joystick Forward: Push up the right joystick Descend: Pull down the left joystick Backward: Pull down the right joystick &@ 2 Turn Right: Push the left Joystick Ely to the Right: Push the right Joystick te the right tn the right Turn Left: Push the eft joystick Fly to the Left: Push the right joystick to th
Install the battery into the drone after it's fully charged. Firebase push the battery to the end. Long press the ON /OFF button to start. Note: You may refer tn our tutorial dives for reference. 1.Turn on the drone first, then place It on a fiat surface with the head forward. (the LED on the drone flash). 2. Turning on the controller. The controller will emit "DI DI” sound when turning on. The LED of the drone will go from flashing to solid, indicating that the controller and the drone is now pared.
TAKE OFF: After the linking and calibration, Press this button and the drone will start taking off and hovering in the air LAND: While in the alr, press the same button and the drone wail land automatically. Auto Take off finding Bose Press the One Key Take-off button, the drone will fiy up and hover at about 1.5 meters height. Please pace the drone on the flat surface with enough climbing space before taking off.
30 Flips: When the drone is flying in the sir, press the bunion and a “beep” will be heard, quickly turn the right joystick to either directions and the drone will perform a 360 degrees flip towards that direction. 30 Flips Iota: When the LED it keep flashing, It means the drone Is under low battery made. 3D Flip will BOT be performed by the drone. Prerequisite: Before entering the Headless Mode, the drone Is required to be calibrated. 1.
1. Please search "SHAKE Q10° or scan the QR code to download the APP. 2. Go to the wife setting of your smart phone and connect to the wife 3. Launch the "SHAKE Q10” APP and tap “start” Important Note: 1) Please make sure that "HASAKEE-QLO-XI0M™ WIGHT is only connected to one snark phone. 2) If you fails to see the First Parson Viewfinder) after clicking “start” in the APP, it may because the app has been shielded by the smart phone.
By Take Photo Calibration 5 3D Flips = Si 4] Record Video Media Gallery ON/OFF 2% Unlock/Lack Special Effects it Vole Control Flip Image “on VR Mode More Gravity Sensor Se Qo 20 speed Switch Gesture Control om—e ia Headless Mode 1%: Trajectory Flight . How to contra! the drone with the APP instead of remote controller? Turn on the drone Connect wife Open the APP and click “Start” Click [£2] Icon (Leon x light up) Click: icon to start the flight.
TROUBLESHOOTING ETT EIT GETTY The light on the drone are dashing and the drone is nat responding. Sufficient battery power 2. Contruiter Is NOT connected to the drone. 3. Unbsisnced position. 4.Cannot pair due to the drone being powered on for a long teems. 1. Fylly charge the battery. 2.7um off the drone and controller Reconnect therm by turning on the drone first then the controller Pisces the drone on 2 horizontal fiat surface and reconnect them. 4.
SHAKE is committed to leave all our customers best products and services. We value each of our customers and appreciate your suggestions and opinions. Please fee! free to contact us: Subscribe us on You Tuba HTTP: //www Facebook. com/hasakeetoys/ FCC Compliance This advice complies with Part 15 of the FOC Rules.