Installation Guide

For warranty information, visit our website | shapeproducts.com
1. Place the window well cover over the window well
and push it tight against the exterior of the house.
(FIGURE A)
2. Center the cover on your well and mark the locations
where the clips will attach. (FIGURE B)
3. Remove the cover from your well and drill a 3/16”
hole at each marked location. (FIGURE C)
4. Mount the clips to your cover using the provided cap
nuts and bolts provided and tighten the screw until
you’ve reached your desired tension. (FIGURE D)
5. Snap the window well cover onto the rim of the
window well. (FIGURE E)
• Tension Spring Clips
• 3/16” Bolts
• 3/16” Cap Nuts
VIDEO INSTRUCTIONS
FIGURE A
FIGURE B
FIGURE C
FIGURE D
FIGURE E
What You Need
Installation
WINDOW WELL COVER
SPRING CLIP INSTALLATION INSTRUCTIONS