Owner`s manual

9
REMOTE CONTROL BOX
MAIN COMPONENTS
1 CONTROL LEVER
2 NEUTRAL LEVER FIXING ROD
3 NEUTRAL GEAR ACCELERATOR CONTROL LEVER
4 STARTING KEY
6 SECURITY SWITCH
7 TACHOMETER CONNECTOR
8 ELECTRIC MOTOR WIRING
9 GAS CONTROL FLEXIBLE WIRES
10 GEAR CONTROL FLEXIBLE WIRES
11 SCREW REGULATING CLUTCH AND ACCELERATOR
12 TRIM SWITCH
Picture No. 13
CONTROL FUNCTIONS
(remote control box))
Control lever
It controls the selection of the forward gear, of the reverse gear and of the
acceleration
Neutral lever fixing rod
It fixes the control lever in the neutral position end has to be pulled up to
select the forward gear or the reverse gear.
Neutral gear accelerator control lever
It allows to control the accelerator when the clutch is in the neutral
position, to increase the number of r.p.m. you must pull it up.
Starting key
Turning it in a clockwise direction till the position ON the electric circuit
operates, continuing with the rotation till the START position the motor
starts. If you release the key from the START position, it returns
automatically to the ON position. To switch of the motor put the key in the
OFF position.
Security switch
Insert the nippers of the wire to be bound around the pulse. In case of
necessity give a blow to the wire and the motor stops.
The motor doesn't start if the nipper of the security switch isn't connected.
Tachometer connector
To be used to connect the tachometer.
Wiring connector
To be engaged with the motor connector to get the electrical connection.
Power Trim switch
Switch to control the motor's inclination.