Manual

19 20sharkclean.com
To keep your vacuum’s
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
FILTER MAINTENANCE
EMPTYING THE DUST CUP
1 Press down on Dust Cup
Release button and lift
dust cup off pod.
2 Hold dust cup over a trash
bin and press the latch
on the bottom of the dust
cup to empty it.
3 Press top Dust Cup Empty
latch to access dust
screen and remove built-
up debris asrequired.
CLEANING THE FILTERS
1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes asneeded.
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill,
press the button, and pull
the grill away from the
vacuum. Remove and
rinse the HEPA filter.
STEP 1 STEP 2 STEP 3
IMPORTANT: Do not use
soap when cleaning the
filters. Do not scrub HEPA
filter material.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF650
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF650
Clean once a year.
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
Filter Access