DuoClean® PowerFins Powered Lift-Away® with Self-Cleaning Brushroll Upright Vacuum AZ2000 Series OWNER’S GUIDE POWERFINS
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. 14. D O NOT put any objects into nozzle or accessory openings.
ASSEMBLY ASSEMBLY 3 (Click) 1 (Click) 4 (Click) 2 (Click) 5 (Click) 1. Place motorized Nozzle on floor and insert Wand, pressing it in until it clicks securely into place. 2. Place Pod onto wand and slide down to connect. 3. Insert Handle into wand, pressing it in until it clicks securely into place. 4. Connect Hose to back of pod, pressing it in until it clicks securely into place. 5. Store included accessories on the Accessory Posts on the pod.
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER SWITCH SURFACE SELECTOR Press power button to turn on vacuum. Please note the brushrolls will not spin unless the wand is reclined. Thick Carpet & Area Rug Cleaning Slide the surface switch to the top position to select Thick Carpet/Area Rug. Carpet & Low Pile Cleaning Slide the surface switch to the middle position to select Carpet/Low Pile to increase the speed of the brushrolls and to help remove stuck-on dust and debris.
EMPTYING THE DUST CUP CLEANING AND REPLACING THE FILTERS CLEANING FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. Regularly rinse and replace the filters to maintain your vacuum’s suction power. To prevent damage from cleaning chemicals, rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts. IMPORTANT: DO NOT use soap when cleaning the filters.
MAINTENANCE CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE SELF-CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue vacuuming, using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll.
AVAILABLE ACCESSORIES A B C D E F G H I J revice Tool C This slender tool offers extended reach to access corners, baseboards, tight spaces, and ceilings. Upholstery Tool Picks up hair, dust, and large debris from mattresses, couches, curtains, lampshades, and other delicate upholstered fabrics.
FIVE (5) YEAR LIMITED WARRANTY The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® Vertex™ DuoClean® POWERFINS Powered Lift-Away® with Self-Cleaning Brushroll Upright Vacuum. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product.
