Operating instructions

96-718, 97-721, 97-723 • REV. 8/05a

OPERATOR’S MANUAL

PRESSURE WASHER

STEP 7: Turn the engine switch to "ON" position. STEP 8: Pull the starter grip. If the engine fails to start

after 2 pulls, squeeze the trigger gun to release pres sure

and repeat step. Return start er gently. After the en gine

warms up enough to run smoothly, move choke to run

position and throt tle to fast position.

CAUTION: Small engines may kick back. Do not hold

pull starter grip tightly in hand.

OPERATING INSTRUCTIONS (CON'T)

WARNING! Never replace

noz zles without engaging the

safe ty latch on the spray gun

trig ger.

The ﬁ ve color-coded quick con nect

noz zles provide a wide array of spray

widths from 0° to 45° and are easily ac-

cessible when placed in the con ve nient

rubber nozzle holder, which is provided

on the front of the ma chine.

NOTE: For a more gentle rinse, se lect

the white 40° or green 25° noz zle. To

scour the surface, select the yellow 15°

or red 0° nozzle. To apply de ter gent

select the black noz zle.

NOZZLES

On-Off

Switch

Safety

Latch