User Guide

ManualsBrandsShark ManualsOtherShark Cordless Vacuum IZ162HC

QUICK

START

GUIDE

Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.

IZ162HC_QSG_E_MP_Mv1

EMPTYING THE DUST CUP

1. To empty the dust cup,

ﬁrst disconnect the

handheld vacuum from

the wand by pressing

the Wand Release

button and pulling

up on the handheld

vacuum.

Wand Release

Button

CleanTouch

Dirt Ejector

IZ162HC

CORDLESS VACUUM

Use this Quick Start Guide

to start using your new

vacuum’s great features.

For questions, visit us online

at sharkclean.com/support

registeryourshark.com

PRO

ROCKET®

VERSATILE CLEANING

Slide the power button

to the desired power

setting. Place your foot

on the ﬂoor nozzle

and tilt the handheld

vacuum back.

To detach the wand for

above-ﬂoor cleaning, stand

the vacuum upright, then

press the Nozzle Release

button on the bottom of the

wand and pull the wand up

to disconnect it.

To detach the handheld

vacuum, press the Wand

Release button and lift the

handheld vacuum o the

wand.

Attach a cleaning accessory,

then choose the power

setting.

NOTE: Brushroll will only engage

when the handle is tilted back.

THEN

2. Position the dust

cup over a trash

bin and slide the

CleanTouch™ Dirt

Ejector forward.

Operating LLC. CLEANTOUCH and DIRT ENGAGE are trademarks of SharkNinja Operating LLC.

Summary of content (2 pages)

PAGE 1
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum. VERSATILE CLEANING Slide the power button to the desired power setting. Place your foot on the floor nozzle and tilt the handheld vacuum back. To detach the wand for above-floor cleaning, stand the vacuum upright, then press the Nozzle Release button on the bottom of the wand and pull the wand up to disconnect it.
PAGE 2
WHAT’S INSIDE: ASSEMBLY A Handheld Vacuum POWER SETTINGS A B Dirt Engage™ Floor Nozzle C Wand D Upholstery Tool E 8" Crevice Tool F Charger G Li-Ion Battery (Pre-Installed) H HEPA Post Motor Filter (Pre-Installed) BARE FLOOR SETTING OFF D E Slide switch to the top to turn off power. To begin vacuuming in Standard Mode, slide switch to the appropriate setting. F CARPET SETTING Carpet The brushroll spins faster to pick up debris below the surface of your carpets.