Hand Vacuum OWNER’S MANUAL Model EP031 120V., 60Hz. 400 Watts, 3.2 Amps For information or assistance: EURO-PRO Operating LLC 94 Main Mill Street, Door 16 Plattaburgh, NY 12901 Tel: 1 866 98SHARK (1 866 987-4275) www.sharkvac.
IMPORTANT SAFETY INSTRUCTIONS When using your Hand Vacuum, basic safety precautions should always be observed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read all instructions before using your hand vacuum. Use the system only for its intended use. To protect against a risk of electric shock, do not immerse any part of the system in water or other liquids. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
GETTING TO KNOW YOUR HAND VACUUM REPLACEMENT FILTERS Replacement dust cup filter SKU# XSB031 for Model EP031 Call: 1-866-98SHARK (1-866-987-4275) Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time or visit our website: www.sharkvac.com FOR TECHNICAL SUPPORT In U.S.: 800-798-7398 Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time Please Note The Dust Cup Filter is washable. It should, however, be replaced every three (3) months to ensure peak performance of your vacuum.
OPERATING INSTRUCTIONS 3. To use the flexible hose, push the end of the hose into the suction hole, then attach the desired accessory to the other end of the flexible hose, as shown below. Warning: Always unplug from electrical outlet before opening the dust cup (container). Note: Dust cup filter must be used when operating the hand vacuum. Assembling the Hand Vacuum 1. To open the dust cup (container), push the dust cup release button and pull out the dust cup.
