® HV380ANZ Series INSTRUCTIONS AUST: 1800 890 840 NZ: 0800 002 999
THANK YOU for purchasing the Shark® Rocket® Complete with DuoClean™ REGISTER YOUR PURCHASE AUST: 1800 890 840 NZ: 0800 002 999 TIP: You can find the model number and date code on the rating label which is located behind the dust cup.
CONTENTS Important Safety Instructions ������������������������������������������������������������������������������� 3 Getting To Know Your Shark® Rocket® Complete with DuoClean™ ������������������� 5 Assembling Your Vacuum ������������������������������������������������������������������������������������� 7 Using the Motorized Floor Nozzle ����������������������������������������������������������������������� 9 Choosing the Appropriate Setting ��������������������������������������������������������
IMPORTANT SAFETY INSTRUCTIONS FOR HOUSEHOLD USE ONLY WARNING This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE 19 DO NOT allow the appliance to be used by children. Close attention is necessary when used near children. This is not a toy. 20 DO NOT use without brushroll, Soft Roller, dust cup, and all filters in place. GENERAL CLEANING 28 DO NOT vacuum up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.
GETTING TO KNOW YOUR SHARK® ROCKET® COMPLETE WITH DUOCLEAN™ WELCOME! Congratulations on your purchase. Use this Owner’s Guide to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.
A B ll l 0 ll l 0 C E D F Empty Wand Release G H I L J M P K N O NZ: 0800 002 999 6
ASSEMBLING YOUR VACUUM DID YOU KNOW? The motorized floor nozzle and handheld vacuum have LED lights that illuminate the floor surface being cleaned. The lights turn on automatically in either speed setting. STEP 1 CLICK 1 Insert the wand into the motorized floor nozzle connector until you hear a click.
STEP 2 STEP 3 OR CLICK 2 Insert the handheld vacuum into the top of the wand until you hear a click. 3 This vacuum comes with a detachable clip to store up to 2 accessories on board. Snap clip onto the wand. Store one accessory on top holder and one accessory on bottom holder.
USING THE MOTORIZED FLOOR NOZZLE WARNING: This vacuum does not stand up on its own, so when taking a break from cleaning, rest it against a piece of stable furniture or lay it flat on the floor. Using for an application where the unit lacks stability may result in personal injury. NOTE: Before vacuuming your delicate area rugs or carpet, refer to the manufacturer’s recommended cleaning instructions. WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN? Solid Green The brushrolls are on and working as they should.
CHOOSING THE APPROPRIATE SETTING Bare Floor, Area Rugs (I) ll l 0 High Pile Carpets (II) ll l 0 The Shark® Rocket® Complete with DuoClean™ has a 2-speed power slider switch on the handle. Slide the power switch to appropriate speed setting (I or II) and start cleaning. Bare Floor, Area Rugs (I) – The brushroll and the Soft Roller both spin together slowly to clean bare floors and delicate area rugs.
USING YOUR VACUUM IN ABOVE-FLOOR MODE NOTE: Both power settings provide the same suction power. STEP 1 TIP: You can attach the handheld vacuum directly to the motorized floor nozzle for convenient stair cleaning. STEP 2 Wand Release For Long-Reach Cleaning: 1 11 AUST: 1800 890 840 tand the vacuum upright. S Step on the foot pedal and pull the wand up to disconnect it from the motorized floor nozzle. 2 A ttach desired cleaning accessory.
STEP 1 STEP 2 Wand Release For Short-Reach Cleaning: 1 ress the Wand Release button on the P top of the wand to disconnect it from the handheld vacuum. 2 Attach desired cleaning accessory. The LED light on the handheld vacuum turns on automatically when the power is on.
STORAGE TIP: If your unit came with an accessory bag, you can hang the bag on the wall mount with the vacuum. OPTION 1 Handheld Vacuum Catch Handheld Vacuum Storage Hook 1 13 AUST: 1800 890 840 Press the Wand Release button on the top of the wand to release the handheld vacuum. There is a catch on the bottom of the handheld vacuum. Hang it from the hook located on the bottom portion of the wand. Wrap the cord around the two cord hooks.
OPTION 2 2 Use the wall mount that is included. Drill two 8mm holes into the wall and insert the provided plastic anchors into the holes. Using a Phillips-head screwdriver, screw the wall mount into the plastic anchors. Hook the catch on the bottom of the handheld vacuum onto wall mount.
ACCESSORIES There are a variety of A 30 cm Crevice Tool accessories that are compatible Clean in between tight spaces or reach baseboards and with this vacuum series. ceilings with this slim crevice tool. The Quick Start Guide shows the select accessories that are included with your model. Select cleaning accessories are included. Others are available for purchase. B Dusting Brush Cleans hard surfaces and upholstery.
A B C D NZ: 0800 002 999 16
MAINTAINING YOUR VACUUM WARNING: Hand wash filters with water only to prevent damage from cleaning chemicals. Allow ALL filters to dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts. CAUTION: Turn power off and unplug before servicing. IMPORTANT: Clean the dust screen inside the dust cup as required. NOTE: Empty dust cup when debris reaches the MAX fill line.
Pre-Motor filters Clean Filter Foam Felt Dust Cup Release Empty Post-Motor filter 2 Hold dust cup over a trash bin and press the Empty button on the front of the dust cup. The bottom lid will open, allowing the debris to fall out. 3 Once dust cup is empty, close the bottom lid and insert dust cup back into handheld vacuum until you hear it click into place. CLEANING THE FILTERS 1 Access the Pre-Motor foam and felt filters by lifting the latch on the top of the handheld vacuum.
MAINTAINING YOUR VACUUM - CONT. WARNING: Do not cut anything but the hair, fibers or string that is wrapped around the the brushroll. STEP 1 STEP 2 TIP: Ensure the brushroll garage is completely sealed and closed before using. NOTE: Heavy usage over time may require minimal upkeep in order to maintain your vacuum’s appearance. MAINTAINING THE BRUSHROLL 1 ress down on the two P buttons on the floor nozzle to pop up the brushroll garage lid. 2 Lift the brushroll out by the tab on the left side.
MAINTAINING THE SOFT ROLLER 1 Slide the Soft Roller access button up to remove the Soft Roller. 4 Reinsert the Soft Roller by sliding it into the front of the nozzle until it clicks into place. 2 Use the onboard hair removal tool to remove any string, carpet fibers or hair that may be wrapped around the Soft Roller. The tool is located in a compartment on the nozzle, above the brushroll. You can also tap loose debris off the Soft Roller, or wipe it clean with a dry towel.
TROUBLESHOOTING GUIDE WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing. Vacuum is not picking up debris. No suction or light suction. (Refer to Maintenance section for more information.) • C heck filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinserting in the vacuum. • Dust cup may be full; empty dust cup. • Check floor nozzle for blockages; clear blockages if required.
FIVE (5) YEAR LIMITED REPLACEMENT WARRANTY If your product becomes defective due to faulty material or workmanship within a period of 5 years from the date of purchase, we warrant to do the following: • For New Zealand Consumers: We will replace the product with a new product, free of charge, or repair the product at our cost, at our discretion. • For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
GMA-501309-EA Exclusively Distributed Throughout Australasia by: Brand Developers Aust Pty Ltd Unit 3, 2 Roussos Place, Truganina, VIC 3029, AUSTRALIA AUST Customer Care: 1800 890 840 Brand Developers Limited Unit H, 686 Rosebank Road, Avondale, 1026 Auckland, NEW ZEALAND NZ Customer Care: 0800 002 999 Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.
