Owner’s Guide NV22UKL NV22UKL_26_IB_110314_2.
Contents This appliance complies with the WEEE-Directive 2002/96/EC on the disposal of electrical and electronic equipment (WEEE). This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK® NAVIGATOR UPRIGHT VACUUM, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® NAVIGATOR UPRIGHT VACUUM.
Getting Started 4 8 9 c 5 d 3 7 b 2 Along with your upright unit, you will find the following components: a Handle Assembly b Cleaning Attachments c Extra Filters d Super Stretch Hose e Floor Power Nozzle f Vacuum Body g Cleaning Wand h Pet Hair Power Brush i 24” Crevice Tool j Accessory Bag (not shown) 4 www.lakeland.co.uk NV22UKL_26_IB_110314_2.indd 4-5 Your Shark® Navigator Upright is easy to assemble: 1 L ay your vacuum body on a level surface.
Cleaning with the Vacuum Accessories Using the Vacuum Bare Floors / Tools 1 OFF 4 1 Carpets 4 5 6 3 2 Indicator Light Your Shark® Navigator Upright Vacuum is a versatile tool that can be used to clean bare floor surfaces or carpets – with the click of a switch. Stand the vacuum into the upright position. Plug in the vacuum. 1 S tart with the Power Switch in the “O Off” position. 2 P lace your foot on the Floor Power Nozzle and pull handle towards you.
Proper Care of Your Shark® Upright Vacuum Emptying the Dust Cup Assembly CAUTION: Unplug the vacuum; failure to do so might result in electric shock. For best results empty the Dust Cup Assembly after each use; empty several times during prolonged usage. Or empty the Dust Cup Assembly when it reaches the MAX fill line; NEVER OVER-FILL THE DUST CUP. For proper care, consult the table to the right for the maintenance schedule of your Cyclonic Chamber and Filters. Lock vacuum into upright position.
Checking for Blockages Troubleshooting WARNING: to reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. Blockages may cause your vacuum to overheat and shut down. If so, clear the blockages, then follow the instructions for Resetting the Motor Thermostat on page 12. ARNING: Never insert sharp W objects into any opening to clear an obstruction.
Notes Maintenance Resetting the Motor Thermostat Your Shark® Upright Vacuum is equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. A To reset the Motor Thermostat: Move the Power Button to the “O – Off” position. Unplug the vacuum. Check for clogged hose or filter; unclog hose and replace filter. Refer to Checking for Blockages on page 11. 12 www.lakeland.co.uk NV22UKL_26_IB_110314_2.
Shark Customer Services PO Box 298 Mirfield WF14 9BA Freephone 0800 862 0453 www.lakeland.co.uk Technical Details Model number: Input: Main unit voltage: NV22UKL 26 1200 Watts 220-240V., 50 Hz. COPYRIGHT© EURO-PRO OPERATING LLC 2011 PRINTED IN CHINA NV22UKL.E.110314.2 Illustrations may differ from actual product. Not to be disposed of with other household waste. NV22UKL_26_IB_110314_2.
