Owner’s guide NV350W www.sharkclean.com NV350W_26_IB_ENG_101201.
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING AN ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® NAVIGATOR LIFT-AWAY. POLARIZED PLUG: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
HOSE ATTACHMENTS: DUST CUP/FILTERS/ACCESSORIES: 1. DO NOT use if air flow is restricted; if the air paths, the hose, or the accessories become blocked, turn the vacuum cleaner off. Remove all obstructions before you turn on the unit again. Before turning on the vacuum: 2. Keep the end of the hose and accessory openings away from face and body. 3. Keep cleaning tools and hose suction openings away from hair, face, fingers, uncovered feet, or loose clothing. 4.
This manual covers model number: NV350W 26 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz Watts: 1200W Amps: 10A 4 TOLL FREE: 1-800-798-7398 NV350W_26_IB_ENG_101201.
Contents Thank you for purchasing the Shark® Navigator Lift-Away. Getting Started 6 Mode 1: Upright Vac 8 Mode 2: Detachable Canister 10 Above-Floor Cleaning 11 With Floor Nozzle 11 Storing 12 Maintenance 12 Emptying the Dust Cup 13 Cleaning the Pre-Motor Filters 13 Cleaning the Post-Motor HEPA Filter 14 Cleaning the Turbo Brush 14 Cleaning the Motorized Floor Brush 15 Checking for Blockages 15 Ordering Parts 16 Troubleshooting Guide 17 Warranty 18 www.
Getting Started f a b g c h d Fig. 1 Fig. 2 i Fig. 3 e Fig. 4 ACCESSORIES: CREVICE TOOL FIRST THING’S FIRST, YOU NEED TO KNOW WHAT’S IN THE BOX YOU JUST OPENED: Reach deep into narrow spaces and clean between cushions, under radiators and baseboards and in hard to reach crevices and corners. (Fig. 1) DUSTING BRUSH b Accessory Holder Dust shelves, lamp shades, window blinds, books, furniture and other upholstered household items. (Fig.
our new Shark® Navigator Lift-Away vacuum cleaner can easily be configured into different Y cleaning modes to meet all your cleaning needs: upright vacuum and detachable canister - both with constant suction power. Fig. 5 Fig. 6 MODES: 1 UPRIGHT VAC 2 DETACHABLE CANISTER Upright vacuuming - floors and carpets. (Fig. 5) Take the detachable canister with you around the house to clean all kinds of hard to reach places. (Fig. 6) www.sharkclean.com NV350W_26_IB_ENG_101201.
Mode 1: Upright Vac To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or converting modes. WARNING: The On/Off switch is on the top of the detachable canister. Always ensure the power is OFF (“O” position) before plugging and unplugging. d Upper Cord Storage Wrap b a e c Fig. 7 Fig. 8 TO ASSEMBLE: 1 Place the floor nozzle on a level surface.
Cord Hook Suction Release Collar a d Release suction for easier push & pull on high pile carpets and area rugs. b c Fig. 10 Fig. 11 1 R otate the cord release to quickly release the power cord. 4 G ently press the floor nozzle down with your foot while you grasp the handle and tilt it back towards you. (Fig. 11) 2 S ecure the power cord in the cord hook (a). (Fig.
Mode 2: Detachable Canister You can carry your vacuum cleaner in both modes by the carry handle located on top of the dust cup. a b Fig. 12 Fig. 13 LIFT AWAY DETACHABLE CANISTER FOR PORTABLE CLEANING 3 A ttach desired accessory onto the end of either the extension wand or the handle. 1 S eparate the detachable canister from the floor nozzle. (See page 8, Fig. 7.
Above-Floor Cleaning a Fig. 14 Suction Release Collar With Floor Nozzle Release suction for easier push & pull on high pile carpets and area rugs. CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR DETACHABLE CANISTER MODE 1 Press the handle release button and pull the handle up or press the extension wand release button and pull the extension wand up. 2 A ttach desired accessory onto the end of either the extension wand or the handle. (Fig. 14) 3 Y our vacuum has tremendous suction power.
Maintenance Storing To reduce the risk of electric shock, unplug the unit before performing any cleaning, maintenance, or troubleshooting checks. Reassemble all parts securely before operating vacuum. DO NOT operate the vacuum without the premotor filters and dust cup in place. DO NOT operate the vacuum with WET filters. Quick Cord Release IMPORTANT: Make sure all filters are completely dry before inserting back into vacuum.
COMPONENT MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum. 2 Pre-Motor Foam Filter Rinse and air dry every 3 months under normal use. 3 Pre-Motor Felt Filter Rinse and air dry every 3 months under normal use. 4 Post-Motor HEPA Filter Clean once every 2 years or as needed. Screen Filter Pre-Motor Foam Filter Felt Filter Post Motor HEPA Filter Fig. 19 Fig.
Maintenance - cont’d a Fig. 24 Fig. 21 Fig. 23 Fig. 22 Fig. 25 CLEANING THE POST-MOTOR HEPA FILTER CLEANING THE TURBO BRUSH 1 Remove the filter cover from the front of the vacuum by pulling up on the tab and pulling the cover away from the vacuum. (Fig. 21) 1 Slide the locking latch (a) forward and gently tilt brush housing upward to open. (Fig. 24) 2 Take out the HEPA filter by pulling it straight out.
Make sure you are working in a well lit area and use a flashlight to help search for blockages. Rotating Brush Fig. 26 Fig. 27 CLEANING THE MOTORIZED FLOOR BRUSH CHECKING FOR BLOCKAGES When your motorized floor brush needs cleaning or locks onto an object, it automatically shuts down to prevent damage to your lifetime belt. The indicator light will illuminate red warning you to turn off the vacuum and clear blockage immediately.
Maintenance - cont’d Ordering Parts 1 2 Fig. 28 3 Fig. 29 • Remove the dust cup and extension wand and separate the detachable canister from the motorized floor brush. Look in all 4 openings for any blockages. (Fig. 28) Motorized Floor Brush • Detach the hose on the motorized floor brush at the top by squeezing the tabs together and pulling out, and at the bottom by pulling out the connector. Inspect inside the 3 holes. (Fig.
Troubleshooting Guide PROBLEM Vacuum is not picking up dirt. POSSIBLE REASONS & SOLUTIONS Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. (See “Maintenance” sections for instructions.) Dust cup may be full; empty dust cup. Check hose and hose connections for blockages; clear blockages if required. If dust cup is empty, and attachment inlets are clear, check for other blockages.
EURO-PRO TEN-YEAR (10) LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of ten (10) years from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions. The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
Notes www.sharkclean.com NV350W_26_IB_ENG_101201.
Euro-Pro Operating LLC US: Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7 English: 1-800-798-7398 www.sharkclean.com Copyright © 2010 Euro-Pro Operating LLC Printed in China Illustrations may differ from actual product. NV350W.E.101201 NV350W_26_IB_ENG_101201.
