NP320UKL OWNER’S GUIDE NP320UKL_40_IB_ENG_120518_2.
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING AN ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® LIFT-AROUND™ PORTABLE VAC.
GENERAL USE: GENERAL CLEANING: 1. Use only as described in this manual. 1. DO NOT pick up large-sized objects. 2. DO NOT put any objects into openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. 2. DO NOT pick up hard or sharp objects such as glass, nails, screws or coins that could damage the vacuum cleaner. 3. Keep your work area well lit. 4. DO NOT place the vacuum on unstable surfaces such as chairs or tables. 5.
This appliance complies with the WEEE-Directive 2002/96/EC on the disposal of electrical and electronic equipment (WEEE). This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/ EC and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
Contents Thank you for purchasing the Shark® Lift-Around™ Portable Vac. Getting Started.............................................................................5 How to Use....................................................................................7 Maintenance.................................................................................8 Checking for Blockages................................................................10 Storing..........................................................
Getting Started A B H C I D E J F K G FIRST THING’S FIRST, YOU NEED TO KNOW WHAT’S IN THE BOX YOU JUST OPENED: A Lift-Around ™ Portable Vac B Removable Tool Caddy C Power Brush D Upholstery Brush E Crevice Tool F Dusting Brush G Straight Suction Nozzle Use the Shark® Lift-Around™ Portable Vac as a stand alone vacuum for spotcleaning small areas and large piles of debris, or with the Flexible Hose and cleaning tools for above-floor cleaning.
NOTE: Always turn the power off before attaching or detaching accessories. REMOVABLE TOOL CADDY (B) Specially designed to hold the crevice tool, dusting brush and upholstery brush for quick access to tools when vacuuming and cleaning around the house. POWER BRUSH (C) This small accessory has an air driven brushroll for cleaning upholstery, pet hair and even auto interiors. STRAIGHT SUCTION NOZZLE (G) Powerful cleaning on low-pile carpets and hardwood floors.
How to Use Pull out to remove tool caddy Align arrows to attach tool caddy Fig. 1 Fig. 2 Fig. 3 Power Button Fig. 4 Fig. 5 Fig. 6 ASSEMBLING THE LIFT-AROUND™ PORTABLE VAC 1 Insert the end of the flexible hose into the connector on the front of the Lift-Around™ Portable Vac. (fig. 1) 2 Insert the removable tool caddy onto the back of the Portable Vac. (fig. 2) To remove the tool caddy, hold the vacuum by the handle, pull out slightly from the right side and then remove it from the Portable Vac.
Maintenance To reduce the risk of electric shock, unplug the unit before performing any cleaning, maintenance, or troubleshooting checks. Reassemble all parts securely before operating vacuum. CAUTION: Unplug the vacuum; failure to do so might result in electric shock. For best results empty the Dust Cup after each use; empty several times during prolonged usage or when it reaches the MAX fill line. NEVER OVER-FILL THE DUST CUP. Bottom Door Release Fig. 8 Dust Cup Release Top Door Release Fig.
Maintenance - cont. COMPONENT MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum. 2 Pre-Motor Foam Filter Rinse and air dry every month under normal use. 3 Pre-Motor Felt Filter Rinse and air dry every month under normal use. 4 Post-Motor HEPA Filter Clean once every 24 months under normal use. DO NOT operate the vacuum without ALL the filters in place. DO NOT operate the vacuum with WET filters. DO NOT put the filters in the washing machine or dishwasher.
Checking for Blockages Locking Latch Turbine Wheel Rotating Bristle Brush Fig. 15 Blockages may cause your vacuum to overheat and shut down. To prevent this from happening, check potential blockage areas after heavy use or if you detect a loss of suction or poor cleaning performance. 1 DUST CUP Dust Cup may be full. Empty Dust Cup. 2 FILTERS (PRE-MOTOR AND POST MOTOR) Fig.
Storing Resetting the Motor Thermostat Fig. 17 Fig. 18 STORE YOUR VACUUM SAFELY 1 S tore the dusting brush, upholstery brush, the crevice tool or the power brush on the mounts on the removable tool caddy. (fig. 17) 2 rap the flexible hose around the base of the W vacuum and hook the end of the flexible hose into the hose dock. (fig. 18) To release the hose, press the Hose Storage button. Your Shark® Lift-Around™ Portable Vac is equipped with a protective Motor Thermostat.
Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Check Filters to see if they need cleaning. Follow instructions for rinsing and drying the Filters before re-inserting back into the Vacuum. (See “Maintenance” sections for instructions.) Vacuum is not picking up dirt. Dust Cup may be full; empty Dust Cup. Check Hose, Hose connections and accessories for blockages; clear blockages if required. If Dust Cup is empty, and attachment inlets are clear, check for other blockages.
Notes 13 www.lakeland.co.uk NP320UKL_40_IB_ENG_120518_2.
Notes www.lakeland.co.uk NP320UKL_40_IB_ENG_120518_2.
Shark Customer Services PO Box 298 Mirfield WF14 9BA Freephone 0800 862 0453 www.lakeland.co.uk Technical Details Model number: Input: Amps: Main unit voltage: NP320UKL 40 550 Watts 4.6 220-240V~, 50/60 Hz. Not to be disposed of with other household waste. COPYRIGHT© EURO-PRO OPERATING LLC 2012 PRINTED IN CHINA NP320UKL.E.120518.2 Illustrations may differ from actual product. NP320UKL_40_IB_ENG_120518_2.
