Quick Start Guide

Remove dust cup to access foam
and felt filters. To remove HEPA
filter, press down on top of filter
door, then tilt and lift out door.
Press tab at top of HEPA filter and
pull out filter.
To reinstall, insert HEPA filter into
unit and replace the filter door.
Rinse foam and felt filters every
month to keep the suction strong.
Rinse HEPA filter every year.
Rinse filters with water only and allow them to air-dry
completely before reinstalling. Between washes, tap loose
dirt from filters as needed.
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Vacuum Pod
B
Handle & Hose
C
Wand
D
Hose Holder
E
5.5" Crevice Tool
F
Dusting Brush
G
Upholstery Tool
WHAT’S INSIDE EMPTYING THE DUST CUP
MAINTENANCE
QUICK START GUIDE
Empty the dust cup after each use.
clean
A
BC
F
G
D
E
Brushroll access
Unlock Open Cover Clear Intake
Use a coin to turn the locks counterclockwise until they click
open, then lift the cover to access the brushroll. Clear the
debris intake.
(Click)
(Click)
(Click)
(Click)
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
SWIVEL PRO COMPLETE
HEPA
Filter
Filter
Door
Foam
Felt

Summary of content (2 pages)