User Manual

8 TOL L FREE: 1-800-798-7398

Upper Cord

Storage Wrap

WARNING: The On/Off switch is on the top of the Lift-Away

canister. Always ensure the power is

OFF (“O” position) before plugging and unplugging.

To reduce the risk of electric shock, unplug the unit before assembling, adding or removing

attachments or converting modes.

TO ASSEMBLE:

1 Place the ﬂoor nozzle on a level surface.

2 Align the tube of the ﬂoor nozzle with the tube on the

Lift-Away

canister and lower until you hear the two

pieces click into place. (Fig. 9)

When attaching the motorized ﬂoor brush, ensure

that the latching mechanism is fully locked in place to

ensure electrical connection has been made.

3 Attach the end of the extension wand to the tube on

the back of the Lift-Away

canister until it clicks into

place. (Fig. 10)

Slide the accessory holder (a) positioned opposite the

upper cord wrap, over the extension wand. Align the

tab with the groove and push down.

(Fig. 11)

5 Push the handle (b) onto the top of the extension

wand until you hear it click into place. (Fig. 11)

6 Insert the end of the stretch hose (c) into the

connector on the back of the Lift-Away

canister.

(Fig. 11)

7 Store the dusting brush (d) and the crevice tool (e)

on the mounts of the accessory holder. (Fig. 11)

Fig. 9 Fig. 10

Fi g. 11

Mode 1: Upright Vac