WWW.SHARKCLEAN.
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING AN ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK NAVIGATOR® LIFT-AWAY® PRO. POLARIZED PLUG: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
Contents Thank you for purchasing the Shark Navigator® Lift-Away® Pro Getting Started 6 Mode 1: Upright Vac 8 Mode 2: Portable Lift-Away 10 ® Above-Floor Cleaning 11 Dust-Away Hard Floor Attachment Use & Care 12 Storage and Maintenance 13 ™ Maintenance 14 Emptying the Dust Cup 14 Cleaning the Pre-Motor Filters 14 Cleaning the Post-Motor HEPA Filter 15 Cleaning the Power Brush 15 Cleaning the Motorized Floor Brush 16 Checking for Blockages 16 Ordering Parts 17 Trouble
Getting Started Your new Shark Navigator® Lift-Away® Pro vacuum cleaner can easily be configured into different cleaning modes to meet all your cleaning needs: upright vacuum and portable Lift-Away® - both with constant suction power. g a h b Fig. 1 Fig. 2 i c Fig. 3 Fig. 4 Fig. 5 j d Fig.
Mode 1: Upright Vac Suction Release Collar WARNING: The On/Off switch is on the top of the Lift-Away® canister. Always ensure the power is OFF (“O” position) before plugging and unplugging. To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or converting modes. c a Release suction for easier push & pull on high pile carpets and area rugs. b d a e Upper Cord Storage Wrap b c Fig. 13 Fig.
Mode 2: Portable Lift-Away® Above-Floor Cleaning You can carry your vacuum cleaner in both modes by the carry handle located on top of the dust cup. a a a b Fig. 18 Fig. 15 Fig. 16 Fig. 17 PORTABLE LIFT-AWAY® 1 S eparate the portable Lift-Away® canister from the floor nozzle by pressing the red release button (a) on the side of the canister. Gently hold the nozzle to the floor with your foot and pull the canister up. (Fig.
Dust-Away™ Hard Floor Attachment - Use and Care Storage and Maintenance I MPORTANT: Use only in Portable Lift-Away® mode. Quick Cord Release Lower Cord Storage Clip Fig. 19 Fig. 20 ATTACH PAD S lip two of the tabs between the suction nozzle and the Dust-Away™ base and attach them to the front fasteners on the base. Then pull the other two tabs tightly around to the back fasteners on the base. For best results, ensure that the pad is flat against the bottom surface and secured tightly. (Fig.
Maintenance COMPONENT MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum. 2 Pre-Motor Foam Filter Rinse and air dry every 3 months under normal use. 3 Pre-Motor Felt Filter Rinse and air dry every 3 months under normal use. 4 Post-Motor HEPA Filter Clean once every 2 years or as needed. a Fig. 26 IMPORTANT: Loss of Suction may occur if foam filters are not cleaned every 3 months. Rinse and allow to air dry completely. Also, tap loose dirt off filter between washes as needed.
Maintenance - cont’d Ordering Parts 1 2 7 Rotating Brush 3 Fig. 31 Fig. 35 Fig. 33 8 4 9 5 Fig. 36 Fig. 32 Fig. 34 CLEANING THE MOTORIZED FLOOR BRUSH CHECKING FOR BLOCKAGES 4 Hose and Connections to Vacuum When your motorized floor brush needs cleaning or locks onto an object, it automatically shuts down to prevent damage to your lifetime belt. The indicator light will illuminate red warning you to turn off the vacuum and clear blockage immediately.
Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Vacuum is not picking up dirt. Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. (See “Maintenance” sections for instructions.) Dust cup may be full; empty dust cup. Check hose and hose connections for blockages; clear blockages if required. If dust cup is empty, and attachment inlets are clear, check for other blockages.
SharkNinja Operating LLC U.S.: Newton, MA 02459 Canada: Ville St. Laurent, Québec H4S 1A7 1-800-798-7398 www.sharkclean.com Copyright © SharkNinja Operating LLC 2015 For SharkNinja U.S. Patent information visit http://www.sharkninja.com/USPatents. Lift-Away, Shark and Shark Navigator are registered trademarks of SharkNinja Operating LLC. Dust-Away is a trademark of SharkNinja Operating LLC. Printed in China Illustrations may differ from actual product.