NV42 Owner’s Guide www.sharkclean.
This manual covers model number: NV42 26 TECHNICAL SPECIFICATIONS Voltage: 120V.
English Contents Thank you for purchasing the Shark® Navigator® Deluxe Upright Vacuum. Important Safety Instructions 2 Getting Started 4 Using the Vacuum 6 Cleaning with the Vacuum Accessories 7 Emptying the Dust Cup Assembly 8 Proper Care of Your Vacuum 9 Troubleshooting 10 Checking for Blockages 11 Maintenance 12 Warranty and Registration 13 www.sharkclean.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK® NAVIGATOR UPRIGHT VACUUM, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® NAVIGATOR UPRIGHT VACUUM. POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. Do not force into the outlet or try to modify the plug to fit.
English GENERAL USE: GENERAL CLEANING: 17. Use only as described in this manual. 25. DO NOT run the vacuum over large-sized objects. 18. DO NOT put any objects into openings. 19. Keep your work area well lit. 20. Keep the vacuum moving over the carpet surface at all times to avoid damaging the carpet fibers. 21. DO NOT place vacuum on unstable surfaces such as chairs or tables. 22. DO NOT allow young children to operate the vacuum or use as a toy. 23.
Getting Started 4 a c e* 5 f b 3 g 7 d 2 h Along with your upright unit, you will find the following components: Your Shark® Navigator Upright is easy to assemble: a Vacuum Body 1 Lay your vacuum body on a level surface. b Motorized Floor Brush c Handle Assembly d Super Stretch Hose e Cleaning Wand f Pet Hair Power Brush g Cleaning Attachments h 24” Crevice Tool 4 2 Slide the electrical connection from the motorized floor brush into the main body to click into place.
English 8 9 c d a b 8 Attach the Super Stretch Hose: a) Snap hose into swivel connector b) Route under anti-tip hook c) Route over upper hose holder d) Press securely onto cleaning wand IMPORTANT: To prevent vacuum from tipping, secure hose under the anti-tip hose hook. 9 When storing your vacuum, wind cord around the two cord holders and secure with cord clip: • Quick Cord release at the top of the unit – place in the upright position.
Using the Vacuum OFF Suction Release Bare Floors / Tools Release suction for easier push and pull on high pile carpets and area rugs. Carpets Your Shark® Navigator Upright Vacuum is a versatile tool that can be used to clean bare floor surfaces or carpets – with the click of a switch. Stand the vacuum into the upright position. Plug in the vacuum. 1 Start with the Power Switch in the “O Off” position. 2 Place your foot on the motorized floor brush and pull handle towards you.
English Cleaning with the Vacuum Accessories 1 4 5 6 5 6 3 2 4 3 Before cleaning with your accessories: Stand vacuum into upright position. Secure Super Stretch Hose in the anti-tip hose hook to prevent tipping. Select the “I On” position for suction only cleaning. DO NOT pull vacuum cleaner around by the hose. DO NOT overextend the hose. Vacuum Accessories 2 Using the Cleaning Wand: Your vacuum comes with a Super Stretch Hose and Cleaning Wand.
Emptying the Dust Cup Assembly CAUTION: Unplug the vacuum; failure to do so might result in electric shock. For best results empty the Dust Cup Assembly after each use; empty several times during prolonged usage. Or empty the Dust Cup Assembly when it reaches the MAX fill line; NEVER OVER-FILL THE DUST CUP. For proper care, consult the table to the right for the maintenance schedule of your Cyclonic Chamber and Filters. Lock vacuum into upright position. Turn vacuum off. Remove Dust Cup Assembly.
Proper Care of Your Shark® Upright Vacuum COMPONENT English MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum. 2 Pre-Motor Foam Filters (2) Rinse and air dry every month under normal use. 3 Pre-Motor Felt Filter Rinse and air dry every month under normal use. 4 Post-Motor Filter Clean once every 12 months under normal use. DO NOT operate the vacuum without ALL the filters in place. DO NOT operate the vacuum with WET filters.
Troubleshooting WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. PROBLEM POSSIBLE REASONS & SOLUTIONS Vacuum is not picking up dirt. Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. (See “Maintenance” sections for instructions.) Dust cup may be full; empty dust cup.
English Checking for Blockages Blockages may cause your vacuum to overheat and shut down. If so, clear the blockages, then follow the instructions for Resetting the Motor Thermostat on page 12. WARNING: Never insert sharp objects into any opening to clear an obstruction. IMPORTANT: Damages caused while clearing or attempting to clear blockages are not covered under your product’s limited warranty. 2 1 3 Unplug the vacuum before checking for blockages.
Maintenance Resetting the Motor Thermostat A Your Shark® Upright Vacuum is equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. 1 Cleaning the Pet Hair Power Brush Slide locking latch (A) forward. Gently tilt brush housing upward to open. I MPORTANT: DO NOT force; it will not open all the way. Remove debris from turbine wheel and air passage. Ordering Replacement Parts To order additional parts and accessories, go to www.sharkclean.
English Euro-Pro Five-Year (5) Limited Warranty EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of five (5) years from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to: • U.
Este manual cubre el modelo: NV42 26 ESPECIFICACIONES TÉCNICAS Voltage: 120V.
Español Índice Gracias por comprar la aspiradora vertical Shark® Navigator. Instrucciones importantes de seguridad 16 Para empezar 18 Uso de la aspiradora 20 Limpieza con los accesorios de la aspiradora 21 Vaciado del recipiente para polvo 22 Cuidado adecuado para su aspiradora 23 Solución de problemas 24 Revisión de obstrucciones 25 Mantenimiento 26 Garantía e inscripción 27 www.sharkclean.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD GUARDE ESTAS INSTRUCCIONES Para uso doméstico solamente SEGURIDAD ELÉCTRICA GENERAL: CUANDO USE UN ELECTRODOMÉSTICO, SIEMPRE DEBE TOMAR PRECAUCIONES BÁSICAS, INCLUYENDO LAS SIGUIENTES: 1. Desenchufe el aparato del tomacorriente cuando no esté en uso o antes de hacerle mantenimiento. LEA LAS INSTRUCCIONES ANTES DE UTILIZAR LA ASPIRADORA VERTICAL SHARK® NAVIGATOR. 3. NO jale o transporte la aspiradora por el cable.
Español USO GENERAL: LIMPIEZA GENERAL: 17. Usela solamente de la forma indicada en este manual. 25. NO pase la aspiradora sobre objetos grandes. 19. Mantenga su área de trabajo bien iluminada. 26. NO recoja objetos duros o filosos tales como vidrio, clavos, tornillos o monedas que pueden causar daño a la aspiradora. 20. M antenga la aspiradora en movimiento sobre la alfombra en todo momento para evitar dañar las fibras de la alfombra. 27.
Para empezar 4 a c e* 5 f b g 3 7 d 2 h Junto con su aspiradora vertical, encontrará los siguientes componentes: Su aspiradora vertical Shark® Navigator es fácil de ensamblar: a Cuerpo de la aspiradora 1 Posicione el cuerpo de la aspiradora en una superficie nivelada.
Español 8 9 c d a b 8 Sujete cada extremo de la manguera de extra extensión: a) Inserte la manguera en el conector giratorio b) Pásela por ebajo del gancho conta caidas c) Pásela por el sujetador para mangueras en la parte superior de la aspiradora d) Presiónela firmemente en la varilla de limpieza IMPORTANTE: Para evitar volcar la aspiradora, sujete la manguera debajo del gancho conta caídas.
Uso de la aspiradora Liberación de succión Power Switch Settings Apagar Pisos lisos / Accesorios Libere la succión para para facilitar el movimiento en alfombras y tapetes gruesos. Alfombras 4 Para limpiar pisos lisos: Seleccione la posición “I On” (encendida) para limpieza de succión solamente para evitar desparramar la tierra mientras limpia. Su aspiradora vertical Shark es una herramienta versátil que puede ser utilizada para limpiar pisos con o sin alfombras- con el clic de un botón.
Español Limpieza con los accesorios de la aspiradora 1 4 5 6 5 6 3 2 4 3 Antes de limpiar con los accesorios: Coloque la aspiradora en posición vertical. Inserte la manguera de extra extensión en el sujetador contra caidas para evitar volcar la aspiradora. Seleccione la posición “I On” (encendida) para limpieza de succión solamente. NO arrastre la aspiradora por la manguera. NO estire la manguera más allá de su alcance.
Vaciado del recipiente para polvo Para los mejores resultados vacíe el recipiente para polvo después de cada uso; vacíelo varias veces durante el uso prolongado. PRECAUCIÓN: Desenchufe la aspiradora; de lo contrario podría provocar una electrocución. O vacíe el recipiente para polvo después de que llegue a la línea MAX; NUNCA PERMITA QUE SE LLENE DE MÁS. Para el cuidado adecuado, consulte la tabla de la derecha por el programa de mantenimiento de su cámara ciclónica y de los filtros.
Español Cuidado adecuado de su aspiradora COMPONENTE PROGRAMA DE MANTENIMIENTO 1 Recipiente para la tierra Vacíelo cada vez que usa la aspiradora. 2 Filtros de espuma del motor (2) Enjuáguelo y séquelo al aire todos los meses bajo condiciones de uso normal. 3 Filtro de fieltro del motor Enjuáguelo y séquelo al aire todos los meses bajo condiciones de uso normal. 4 Filtro de salida Lávelo cada 12 meses bajo condiciones de uso normal. NO use la aspiradora sin tener TODOS los filtros en su lugar.
Resolución de problemas ADVERTENCIA: Para reducir el riesgo de electrocución, debe desenchufar el cable eléctrico antes de hacer revisiones de mantenimiento o de resolución de problemas. PROBLEMA POSSIBLE REASONS & SOLUTIONS La aspiradora no levanta la tierra. Revise si hay que limpiar los filtros. Siga las instrucciones para enjuagar y secar los filtros antes de volver a instalarlos en la aspiradora. (Consulte la sección ‘Mantenimiento’ por instrucciones).
Español Revisión de obstrucciones Las obstrucciones pueden causar que su aspiradora se caliente y se apague. Si este es el caso, quite cualquier obstrucción y luego siga las instrucciones para Reiniciar el termostato del motor en la página 28. ADVERTENCIA: Nunca inserte objetos filosos en ninguna de las aberturas para quitar una obstrucción. 2 1 IMPORTANTE: Los daños provocados mientras quita o intenta quitar alguna obstrucción no están cubiertos bajo la garantía limitada de su producto.
Mantenimiento Reiniciar el termostato del motor A Su aspiradora vertical Shark viene con un termostato para proteger el motor. Si el motor llega a calentarse, el termostato automáticamente apaga el aparato. ® 1 L impieza del cepillo motorizado para pelo de mascotas Deslice el pestillo (A) hacia delante. Suavemente incline el compartimiento del cepillo hacia arriba para abrirlo. IMPORTANTE: NO lo fuerce; no se abrirá completamente.
Garantía limitada Euro-Pro de cinco (5) años Español EURO-PRO Operating LLC garantiza que este producto está libre de defectos en el material y mano de obra por un período de cinco (5) años de la fecha de la compra original, cuando sea utilizado bajo condiciones domésticas normales, sujeta a las siguientes condiciones, exclusiones y excepciones.
Notes 28 LLAMADA SIN COSTO: 1-800-798-7395
Notas Español www.sharkclean.
Euro-Pro Operating LLC USA: Newton, MA 02459 CAN: 4400 Bois Franc, St-Laurent, QC H4S 1A7 English: 1-800-798-7398 Español: 1-800-798-7395 www.sharkclean.com Copyright © Euro-Pro Operating LLC 2011 Derechos reservados © Euro-Pro Operating LLC 2011 Printed in China Impreso en China Illustrations may differ from actual product. Las ilustraciones pueden diferir del producto actual. NV42.26.E.111213.