Model NV581 w w w.SharkClean.com 1. 8 0 0 . 7 9 8 .
Contents Getting to Know Your Shark Navigator Powered Lift-Away ����������������������������������������������������������������������������������������3 Assembly ����������������������������������������������������������������������������������������������������������������������������������������������������������������������4 Upright Cleaning ����������������������������������������������������������������������������������������������������������������������������������������������������������5 What Doe
READ ALL INSTRUCTIONS BEFORE USE IMPORTANT SAFEGUARDS C AUTION: The motorized floor nozzle, wand, and handle contain electrical connections: - These are not serviceable parts. - Do not use to vacuum any liquids. - Do not immerse in water when cleaning. - If handle/wand is damaged, discontinue use.
GETTING TO KNOW YOUR SHARK NAVIGATOR® POWERED LIFT-AWAY™ Nice to meet you! We’ll be fast friends. Pet Multi-Tool 182FLI580 Two cleaning tools in one. The stiff bristle brush gets stuck-on debris off a multitude of surfaces. Remove the bristles to reveal an upholstery tool for removing stubborn pet hair from upholstery and more. 1 3 Duster Crevice 181FLI580 Two cleaning tools in one.
ASSEMBLY A few quick clicks and you’re ready to clean! STEP 1 STEP 2 STEP 3 STEP 4 SLIDE CLICK STEP 5 CL I CK CLICK CLICK 1 Place the motorized floor nozzle on the floor and insert the wand. 2 Insert the handle into the wand. 3 Slide the pod onto the wand. 4 Slide the hose clip into the notch at the back of the wand and push the hose into the inlet on the back of the pod. 1. 8 0 0 . 7 9 8 . 7 3 9 8 5 Insert the duster crevice and pet multi-tool into the accessory posts as shown.
UPRIGHT CLEANING Your hard floors and carpets will thank you. NOTE: DO NOT use to pick up drywall dust or fireplace ash. STEP 1 STEP 2 STEP 3 Floor Selector Suction Control Max 1 Plug power cord into electrical outlet and press POWER button to turn vacuum on. Min 2 For Hard Floor Cleaning Set Floor Selector to Hard Floor and Suction Control to Max for full suction or variable depending on user preference.
ABOVE FLOOR CLEANING Crevices, baseboards, and upholstery beware. NOTE: DO NOT use to pick up drywall dust or fireplace ash. STEP 1 STEP 2 STEP 3 OR Suction Control OR Max Min Wand Release 1 For above floor cleaning with the hose, press the wand or handle release (depending on the amount of reach required) then lift handle up. 2 Insert wand or handle directly into desired tool. 1. 8 0 0 . 7 9 8 .
USING THE DUST-AWAY™ HARD FLOOR ATTACHMENT Pick up debris and wipe away fine dust in one easy step. LIFT-AWAY ™ CLEANING Leave the nozzle behind for an easy and portable clean. Wand Release CLICK OR Dust-Away Hard Floor Attachment 1 Press the Wand Release button to remove the wand from the motorized floor nozzle. 2 Press the Lift-Away button to remove the pod from the motorized floor nozzle. 1 Attach the desired accessory directly into the handle.
POWERED LIFT-AWAY ™ CLEANING Hidden debris: consider yourself warned. Powered Lift-Away is coming for you, with a motorized brush that cleans under, around, and behind any hard-to-reach area. Wand Release OR Press Lift-Away button to lift the pod off the motorized floor nozzle. Insert the wand into the motorized floor nozzle. TIP: Using the vacuum in Powered Lift-Away mode gives you extended reach for cleaning under furniture and in tight spaces.
MAINTENANCE To keep your vacuum’s suction power optimal, follow these instructions. Make sure unit is off and cord unplugged. IMPORTANT: Allow ALL filters to dry completely before replacing into the vacuum. STEP 1 STEP 2 STEP 3 EMPTYING THE DUST CUP 1 Pull up on the dust cup release latch and lift the dust cup off the pod. CLEANING THE FILTERS 1 With the dust cup removed, remove and rinse the foam and felt filters every 3 months. Let air-dry completely before replacing. Hand wash only.
MAINTENANCE To keep your vacuum’s suction power optimal, follow these instructions. Make sure unit is off and cord unplugged. STEP 1 CHECK FOR BLOCKAGES 1 Use a coin to unlock the 2 locks on the bottom of the floor nozzle. STEP 2 2 Pull up to expose the airway. Shine a flashlight from the bottom to check for possible blockage in the airway. STEP 3 3 Remove any string, carpet fibers or hair that may be wrapped around the brush roll.
WE WANT TO HEAR FROM YOU! 1. 8 0 0 . 7 9 8 . 7 3 9 8 w w w.SharkClean.com JOIN THE CONVERSATION: @sharkcleaning WATCH & LEARN MORE: youtube.com/shark EURO-PRO Operating LLC Newton, MA USA 02459 Ville St. Laurent, Québec Canada H4S 1A7 NV581_150709_4 © 2015 Euro-Pro Operating LLC Printed in China For Shark | Ninja U.S. Patent information, visit http://www.europro.com/USPatents Illustrations may differ from actual product.