Corded Upright Vacuum with Lift-Away™ Technology NV602UK Series INSTRUCTIONS sharkclean.co.
THANK YOU for purchasing the Shark® Corded Upright Vacuum with Lift-Away™ Technology. REGISTER YOUR PURCHASE Important Safety Instructions ������������������������������������������������������������������������������� 4 TO BENEFIT FROM YOUR PRODUCT'S EXTENDED GUARANTEE, SIMPLY REGISTER YOUR PURCHASE AT: Getting to Know Your Shark® Lift-Away™ ����������������������������������������������������������� 6 sharkclean.co.
IMPORTANT SAFETY INSTRUCTIONS FOR HOUSEHOLD USE ONLY • PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM. IF YOU HAVE DELICATE OR WOOL CARPETS, PARTICULARLY LOOP PILE, PLEASE TRY THE VACUUM ON A HIDDEN AREA FIRST TO ENSURE THE SPINNING BRUSH-ROLLS DO NOT DAMAGE OR UNPICK CARPET FIBRES. WARNING REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE: GENERAL WARNINGS 1 our vacuum cleaner may consist of Y a motorised nozzle, wand, hose, and/ or vacuum pod.
GETTING TO KNOW YOUR SHARK® CORDED UPRIGHT VACUUM WITH LIFT-AWAY™ TECHNOLOGY. WELCOME! A Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.
ASSEMBLY ASSEMBLY 2 (Click) Upper Cord Hook 1 (Click) Tool Storage Posts 3 (Click) Lower Cord Hook POWER CORD 1. Insert Wand into pod 2. Insert Handle into wand. 3. Attach Hose to back of vacuum pod. NOTE: Ensure all parts firmly CLICK into place before operating. UPPER CORD HOOK For cord access, rotate upper hook down and remove cord. 8 s h a r kc l e a n . c o . u k CORD HOLDER Use cord holder on the side of wand to hold cord in place while vacuuming. s h a r kc l e a n . c o .
SETTINGS POWER/SURFACE SWITCH Select surface setting: O Power Off I Hard Floor For hard floors, small area rugs or delicate carpets - the brush-roll will not spin in this mode. II Carpet For carpets. CLEANING MODES SUCTION CONTROL The Suction Control Slider located on the handle allows you to adjust the suction depending on the floor type. MIN: to reduce suction and increase maneuverability on carpets. MAX: to increase suction on hard floors.
EMPTYING THE DUST CUP IMPORTANT: Unplug the power cord before performing any maintenance. CLEANING THE FILTERS Regularly rinse the filters to maintain your vacuum's suction power. Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts. IMPORTANT: DO NOT use soap when cleaning the filters.
MAINTENANCE CHECKING FOR BLOCKAGES AVAILABLE ACCESSORIES A revice Tool C Clean tight spaces, reach skirting boards and ceilings with this slim crevice tool. B pholstery Tool U Remove pet hair and dust from curtains and other delicate fabrics and upholstery. C usting Brush D Dusts and cleans a multitude of delicate surfaces.
TROUBLESHOOTING GUIDE WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing. Vacuum is not picking up debris. No suction or light suction. (Refer to Maintenance section for more information.) • Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. • Dust cup may be full; empty dust cup.
NOTES 18 s h a r kc l e a n . c o . u k NOTES s h a r kc l e a n . c o .
Euro-Pro Europe Limited, 3150 Century Way, Thorpe Park, Leeds, LS15 8ZB, UK 0800 862 0453 www.sharkclean.co.uk Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. @sharkcleaninguk SHARK is a registered trademark of SharkNinja Operating LLC. LIFT-AWAY is a trademark of SharkNinja Operating LLC.
