SDS

101-58-C 10X PEROIXDE BOOST
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/20/2023 (Revision date)
EN (English US)
3/8
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures
:
Do not handle until all safety precautions have been read and understood.
6.1.1. For non-emergency personnel
Emergency procedures
:
Ventilate spillage area. Avoid contact with skin and eyes.
6.1.2. For emergency responders
Protective equipment
:
Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: "Exposure controls/personal protection".
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
For containment
:
Absorb spilled material with sand or earth.
Methods for cleaning up
:
Take up liquid spill into absorbent material.
Other information
:
Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed
:
Not expected to present a significant hazard under anticipated conditions of normal use.
Precautions for safe handling
:
Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment.
Hygiene measures
:
Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product.
Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures
:
Comply with applicable regulations.
Storage conditions
:
Store in a well-ventilated place. Keep cool.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
101-58-C 10X PEROIXDE BOOST
No additional information available
HYDROGEN PEROXIDE (7722-84-1)
No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
:
Ensure good ventilation of the work station.
Environmental exposure controls
:
Avoid release to the environment.