SDS
101-58D BASE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/13/2023 (Revision date)
EN (English US)
7/7
14.6. Special precautions for user
DOT
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
15.2. International regulations
No additional information available
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
:
04/13/2023
Full text of H-phrases
H319
Causes serious eye irritation
H402
Harmful to aquatic life
NFPA health hazard
:
1 - Materials that, under emergency conditions, can cause significant
irritation.
NFPA fire hazard
:
0 - Materials that will not burn under typical fire conditions, including
intrinsically noncombustible materials such as concrete, stone, and
sand.
NFPA reactivity
:
0 - Material that in themselves are normally stable, even under fire
conditions.
Hazard Rating
Health
:
1 Slight Hazard - Irritation or minor reversible injury possible
Flammability
:
0 Minimal Hazard - Materials that will not burn
Physical
:
0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT
react with water, polymerize, decompose, condense, or self-react. Non-Explosives.
Personal protection
:
B - Safety glasses, Gloves
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product.