S E L F - E M P T Y Robot Vacuum RV1000AE Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. WARNING To reduce the risk of fire, electric shock, injury, or property damage: GENERAL WARNINGS When using an electrical appliance, basic precautions should always be followed, including the following: 1.
GETTING TO KNOW YOUR SHARK IQ ROBOT™ GETTING TO KNOW YOUR SHARK IQ ROBOT™ Base Dust Bin Release Charge Indicator Lights Error Indicator Light FRONT Wi-Fi Indicator Light ! Front Bumper Base Dust Bin Fill Window Clean Button Dock Button Navigation Module Dust Bin Empty Button Dust Bin Release Tabs Charging Base Debris Intake Charging Contact Charging Contact Power Button BACK Docking Sensor Debris Discharge Opening Cliff and Boundary Sensors Base Dust Bin Side Brush Battery Door Self-Clea
BASE SETUP CHARGING IMPORTANT: The Shark IQ Robot™ has a pre-installed rechargeable battery. Battery should be fully charged before using. It may take up to 6 hours to fully charge. 3 ft. 5 ft. 3 ft. SharkMat (for use on carpet) The Self-Empty Base charges your robot and holds dirt and debris from up to 30 days of cleaning. Select a permanent location for the base, because every time you relocate it, your robot will have to completely re-map your house. Choose a level surface in a central area.
CHARGE INDICATOR LIGHTS BUTTONS AND INDICATOR LIGHTS CHARGE INDICATOR LIGHTS Display the amount of charge remaining in the battery. In Use Full Charge (Blue) Partial Charge (Blue) Low Charge (Red) ! While Charging (Blue) “!” ERROR INDICATOR No Charge or Off See Troubleshooting section for full list of error codes. WI-FI INDICATOR Blue light: connected to Wi-Fi. The blue indicator lights on the robot show how much charge is remaining. Red light: not connected.
PREP YOUR HOME MAPPING AND NAVIGATION Maps Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the included BotBoundary® strips. For best results, prepare your home as indicated below, and schedule a daily cleaning to ensure all floor areas are regularly maintained.
USING THE SHARK IQ ROBOT™ MAINTENANCE Please visit sharkclean.com/app or call 1-888-228-5531 for answers to all your app questions. USING THE SHARK CLEAN™ APP AND VOICE CONTROLS CAUTION: Turn off power before performing any maintenance. Get the most out of your Shark IQ Robot™ with these app features: OPTIONS EDIT Kitchen EMPTYING THE ROBOT DUST BIN •C ontrol From Anywhere Wherever you are, you’re in control of your robot.
MAINTENANCE MAINTENANCE EMPTYING THE BASE DUST BIN CLEANING AND REPLACING THE ROBOT FILTER For optimal suction power, regularly clean and replace the filter inside the robot's dust bin. See sharkaccessories.com for replacement filters. IMPORTANT: DO NOT use water to clean the robot filter. The Base Dust Bin holds up to 30 days' worth of dust and debris. Empty the bin when the debris level approaches the max fill line.
MAINTENANCE MAINTENANCE CLEANING AND REPLACING THE BASE FILTERS SELF-CLEANING BRUSHROLL Regularly clean and replace your filters to keep your vacuum's suction power optimal. To clean filters, rinse with cold water ONLY to prevent damage from cleaning chemicals. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts. The Self-Cleaning Brushroll removes debris over time as it cleans.
MAINTENANCE MAINTENANCE CLEANING SENSORS AND CHARGING PADS CLEANING THE WHEELS CLEAN SENSORS AND CHARGING PADS AS NEEDED. With a dry cloth, gently dust off the sensors and pads located on the bottom of the robot and on the base. IMPORTANT: The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when they are dirty. For best results, clean sensors regularly. CLEANING SIDE BRUSHES REMOVE AND CLEAN THE FRONT CASTER WHEEL AS NEEDED. See sharkaccessories.
REPLACEMENT PARTS REPLACEMENT PARTS: ROBOT MAINTENANCE REPLACEMENT PARTS: BASE CAUTION: Turn off power before performing any maintenance.
END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT: SharkNinja Operating LLC’s (“SharkNinja”) End-User License Agreement (“EULA”) is a legal agreement between You (either a single entity or an individual) and SharkNinja for SharkNinja’s Software Applications, including those installed by You onto your Shark
NOTES ONE (1) YEAR LIMITED WARRANTY The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
NOTES REGISTER YOUR PURCHASE registeryourshark.com RECORD THIS INFORMATION Model Number: ������������������������ Date Code: ���������������������������� Date of Purchase: ���������������������� (Keep receipt) Store of Purchase: ���������������������� TIP: You can find the model and serial numbers on the QR code label on the bottom of the robot. EXPECTED PERFORMANCE Expected runtime: at least 60 minutes Expected charging time: 6 hours PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
FCC WARNINGS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to parts 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and accordance with the instructions, may cause harmful interference to radio communications.