User Manual

sharkclean.com
PREP YOUR HOME
NOTE: Scheduling can only be done in the app.
Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it
cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the
included BotBoundary® strips. For best results, prepare your home as indicated below, and schedule a daily
cleaning to ensure all floor areas are regularly maintained.
Clean Dock
!
OBSTRUCTIONS
Clear cords and small objects
from floors and open doors
to ensure a complete map of
your home.
SCHEDULING
For a constant state of clean,
set up a cleaning schedule in
the app.
THRESHOLDS
Your robot may have some
trouble clearing some high
thresholds. Block o high
thresholds with the included
BotBoundary strips.
AVOID MOVING THE
ROBOT OR BASE
While your robot is cleaning,
do not pick it up and move it,
or move the charging base—
this could impact the robot’s
ability to map your home.
STAIRS
Your robot's cli sensors will
prevent it from falling o
ledges. For your robot’s cli
sensors to work properly,
all runners, rugs, or carpets
must be at least 4 inches
from any stairs (or extend
over the edge of the stairs.)
CHECK BASE FILL LEVEL
During the first few weeks,
your robot will empty more
often than usual. Check the
fill level regularly. The dust
bin is designed to hold up
to 30 days’ worth of debris,
but home environments
vary, and the bin may fill up
quicker in some homes.
4-inch
Min.
!
WARNING: Do not put BotBoundary strips near any stairs
or clis.
WARNING: Do not place BotBoundary strips on top of one
another.