User Manual
sharkclean.com
MAINTENANCE
NOTE: The pre-motor foam and felt filters should be
replaced every 2.5 years. The post-motor filter should
be replaced every 3 years.
NOTE: Clean the cyclone filter inside the dust bin with a
small brush once a month.
CLEAN POST-MOTOR FILTER EVERY YEAR
Press the button at the top of the Filter Door, then
tilt the door and lift it o. Remove the Post-Motor
Filter from the base. To reinstall the post-motor filter,
insert it into the base and replace the filter door.
CLEAN PRE-MOTOR FILTERS ONCE A MONTH
Remove the base dust bin, then lift out both Pre-
Motor Filters.
Regularly clean and replace your filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water ON LY to prevent damage from cleaning chemicals. Allow all filters to
air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electricparts.
CLEANING AND REPLACING THE BASE FILTERS
IMPORTANT: DO NOT use soap when cleaning the filters.
Filter
Door
After emptying the dust bin, ensure there is no
debris or dust stuck on the filter mesh.