User Manual

sharkclean.com
5 ft.
3 ft.
3 ft.
BASE SETUP
The Self-Empty Base charges your robot and holds dirt and debris from up to 30 days of cleaning. Select
a permanent location for the base, because every time you relocate it, your robot will have to completely
re-map your house.
Choose a level surface in a central area. Remove any objects that are closer than 3 feet from either side of
the base, or closer than 5 feet from the front of the base. Plug in the Charging Cord, then place the base
with its back against the wall, in an area with a good Wi-Fi signal. For best results, set up base on hard floor.
The base must be plugged in continuously for the robot to find it. The Indicator Light will illuminate green
when the base has power.
INSTALLING THE SIDE BRUSHES
Snap the 2 included Side Brushes onto the square
pegs on the bottom of the robot.
NOTE: For best results, set up on hard floor or thin carpet.
NOTE: Do not place dock against baseboards, heating elements, or in direct sunlight.