ION ROBOT™ RV700 Series INSTRUCTIONS sharkclean.
THANK YOU for purchasing the Shark ION ROBOT™ REGISTER YOUR PURCHASE registeryourshark.com 1-800-798-7398 Scan QR code using mobile device TIP: You can find the model and serial numbers on the QR code label located near the rating label on the underside of the unit.
ENGLISH CONTENTS Important Safety Instructions �����������������������������������������������������3 Getting To Know Your Shark ION ROBOT™ ���������������������������������7 Charging Your Shark ION ROBOT ������������������������������������������������9 Installing the Charging Dock ���������������������������������������������������������������������� 9 Important Charging Information �������������������������������������������������������������� 9 Battery Charge Indicator Lights ��������������������������
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
ENGLISH SAVE THESE INSTRUCTIONS 17 Before using vacuum cleaner, pick up objects like clothes, paper, and cords for blinds or curtains. Move power cords and fragile objects out of the way. DO NOT operate unit in areas where there are lit candles or fragile objects on the floor or on furniture that the unit may accidentally bump into. FILTERS 18 Unit should not be used near balconies or stairs. Use a physical barrier or BotBoundary™ strip to prevent unit from accessing balconies and stairs.
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user. BATTERY AND CHARGING 35 Recharge only with the charging dock and charger specified by the manufacturer.
ENGLISH SAVE THESE INSTRUCTIONS CONFORMITY INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
GETTING TO KNOW YOUR SHARK ION ROBOT™ WELCOME! Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here. NOTE: When using for the first time, fully charge and discharge your Shark ION ROBOT to condition the battery. Failure to do so may cause LED indications to work incorrectly.
ENGLISH ! Clean Spot Dock Replace ! Clean Dock CLEAN BUTTON To begin cleaning with your Shark ION ROBOT™, press the CLEAN button. Press button again to stop. DOCK BUTTON Press DOCK button to stop cleaning and send the unit back to the charging dock. SPOT BUTTON For thorough cleaning of an area of concentrated dust or debris, press the SPOT button. Spot “!” ERROR INDICATOR When a blockage or a filter problem occurs, the “!” error indicator light will illuminate. Clear any blockages and clean filters.
CHARGING YOUR SHARK ION ROBOT™ IMPORTANT: Install the charging dock in a location that can be easily accessed by your Shark ION ROBOT. Always keep the charging dock plugged in, or the Shark ION ROBOT will not be able to automatically return to the base. 3 ft. 3 ft. 5 ft. The Shark ION ROBOT will beep when it is first connected to power or when it starts charging on the dock.
ENGLISH Replace ! Clean Spot Dock Full Charge Cycles While Charging BATTERY CHARGE INDICATOR LIGHTS Replace While the battery is charging, all three blue LED lights will !cycle until fully charged. Clean Full Charge Cycles While Charging Dock Shark ION ROBOT™ can be charged three different ways: 1 Spot As the unit cleans, its battery discharges. The blue lights indicate how much charge is remaining.
SETTING UP YOUR SHARK ION ROBOT™ NOTE: Some carpets may cause the robot to malfunction due to pile height. IMPORTANT: Before cleaning an entire room for the first time, we recommend that you first test your unit on a small section of the floor to ensure there is no scratching. IMPORTANT: Shark ION ROBOT uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when they are dirty. For best results, clean sensors as needed.
Dock Spot ENGLISH USING YOUR SHARK ION ROBOT™ Dock Clean Enter Spot Clean Enter USING THE REMOTE CONTROL (SELECT MODELS) SETTING THE DAY OF THE WEEK AND TIME ON THE REMOTE CONTROL The remote control requires 2 AAA batteries. Install batteries into remote before using. 1 With the remote control, you can start and stop Shark ION ROBOT, select Spot Cleaning mode, send the unit back to the charging dock, and program a cleaning schedule for your robot.
USING YOUR SHARK ION ROBOT™ - continued TIP: Whenever you use the remote control, make sure you point it directly at Shark ION ROBOT, and ensure that Shark ION ROBOT is powered on. Dock Spot Clean Enter SETTING YOUR CLEANING SCHEDULE ON THE REMOTE 1 To schedule a cleaning, the day and time must be set. If you haven’t yet set the date and time, follow the steps on page 12. 2 To schedule or edit a cleaning, press and hold the SCHEDULE button (with the calendar icon) on the remote control for one second.
ENGLISH 7 Use the UP/DOWN arrows to select AM or PM, then press the CLEAN/ENTER button to set. Use the UP/DOWN arrows on the remote to select another day for a scheduled cleaning. 8 When all days and times for scheduled cleanings are set, press the SCHEDULE button on the remote to exit. (After 30 seconds of inactivity, the system will time out.) 9 Important: Once all scheduling is complete, the data must be sent to the Shark ION ROBOT™.
USING YOUR SHARK ION ROBOT™ - continued NOTE: Before cleaning, the robot’s power must be turned on. Press the top of the power switch on the side of the unit to turn on power. TIP: Shark ION ROBOT will automatically return to the charging dock when the battery level is low. BOTBOUNDARY™ STRIPS You may need to keep Shark ION ROBOT away from certain areas, such as pet bowls, fragile objects, power strips, or doorways.
ENGLISH CLEANING MODES Manual Start/Stop Spot Cleaning You can manually start and stop Shark ION ROBOT™. In Spot mode, Shark ION ROBOT will thoroughly clean an area in a spiral pattern. Use Spot mode to clean a concentrated area of dust or debris. 1 1 To start cleaning, press the CLEAN button on Shark ION ROBOT or the CLEAN/ENTER button on the remote control. Shark ION ROBOT selects different cleaning modes and automatically operates until cleaning is complete.
MAINTAINING YOUR SHARK ION ROBOT™ WARNING: Wash the dust bin and filter cover with water only. Be sure to air-dry them completely before reassembling. DO NOT wash the HEPA filter with water, as it may damage the filter and reduce suction power. STEP 1 CAUTION: Turn off power before performing any maintenance. TIP: For best results, empty the dust bin after every cleaning.
ENGLISH STEP 1 STEP 2 STEP 3 STEP 4 CLEANING THE FILTERS 1 With the dust bin out of the unit, clear hair from the Anti-Tangle Comb on the dust bin. 2 Press the filter door release button to open the door and remove the filters. 3 Clean the dust bin and filters with a cleaning brush. 4 Replace the filters and the filter cover. Close the dust bin and slide it back into the Shark ION ROBOT™. s h a r kc l e a n .
MAINTAINING YOUR SHARK ION ROBOT™ - cont’d. CAUTION: Turn off power before performing any maintenance. STEP 1 NOTE: When cleaning brushroll, be sure to not cut anything other than hair, string, fibers, or other debris. STEP 2 STEP 3 CLEANING THE BRUSHROLL 1 Push up on the tabs on the brushroll access door, then lift off the door. 2 Remove the brushroll. 3 Clean the brushroll with the provided hair removal tool.
ENGLISH CLEANING THE CLIFF SENSORS AND CHARGING PADS For best results, clean cliff sensors and charging pads periodically as needed. With a cloth or a cleaning brush, gently dust off the sensors and pads. REPLACING THE SIDE BRUSHES To remove a bent or damaged side brush, pull it off its post. To install new side brush, align hole in center of brush over post on bottom of unit. Press side brush down over the post until it clicks into place.
MAINTAINING YOUR SHARK ION ROBOT™ - cont’d. CAUTION: Turn off power before performing any maintenance. CLEANING THE REMOVABLE FRONT WHEEL The sensor below the removable rotating front wheel on the bottom of the unit should be cleaned once a week. Pull out the wheel and carefully dust the sensor in the cavity below. Replace the wheel and push it in until it clicks into place.
ENGLISH REPLACING THE BATTERY When the battery needs replacement, the red “Replace” light will illuminate. To remove the battery, turn the unit over and unscrew the battery cover with a Phillips-head screwdriver. Unplug the old battery from its connector, then plug in the new battery. Replace battery cover and screw it back into place. Replacement batteries can be purchased at sharkaccessories.com s h a r kc l e a n .
TIPS AND TRICKS FOR GREAT PERFORMANCE Your Shark ION ROBOT™ is designed with Smart Sensor technology so it can clean all areas of your floors and navigate its way out of tight spaces. During your first few cleanings, you may need to make some small adjustments to optimize your robot’s performance. Before Prep Robot Friendly CORDS AND OBSTRUCTIONS Always prep your home before cleaning. Some furniture or loose cords may create problems for your robot.
Use the BotBoundary strips to quickly and easily create “no-go zones” to keep your robot out of the areas you would like it to avoid. These may include: • Near power cords that might cause tangles • Hallways where you’d rather your robot not travel • Around furniture with low clearance that may trap your robot BotBoundary strips BotBoundary strips USAGE INSTRUCTIONS 1.
TROUBLESHOOTING GUIDE WARNING: Always turn off Power switch before performing any maintenance. If any error lights are illuminated or flashing on your Shark ION ROBOT™, see the error code chart below: ERROR CODE 25 SOLUTION All LED lights are off Unit is turned off. Cycle power switch. If no response, plug in to charge unit. Red “Replace” LED light is on Your battery is ready to be replaced. Visit sharkclean.com for replacement DOCK and SPOT alternate flashing A side brush is stuck.
ENGLISH ONE (1) YEAR LIMITED WARRANTY The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. Power pack is not covered by 1-year warranty.
NOTES 27 1-800-798-7398
ENGLISH NOTES s h a r kc l e a n .
NOTES 29 1-800-798-7398
ENGLISH NOTES s h a r kc l e a n .
SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. SHARK is a registered trademark of SharkNinja Operating LLC. BOTBOUNDARY and SHARK ION ROBOT are trademarks of SharkNinja Operating LLC. For SharkNinja U.S. Patent information, visit sharkninja.
