Setup Tips & Tricks
Your Shark ION Robot is designed with Smart Sensor technology so it can
maneuver around obstructions and navigate its way out of tight spaces as
it cleans. During your first few cleanings, you may need to make some small
adjustments to optimize your robot’s performance.
LOW-CLEARANCE FURNITURE
Your robot may find its way under furniture
with low clearance, but not be able to free itself.
Use furniture risers to increase clearance, or
create a no-go zone with BotBoundary strips.
RETURNING TO DOCK
Make sure the dock is set up as shown.
If your robot roams too far, it could have
trouble finding the dock. It may be helpful to
block o part of your home with BotBoundary
strips, or to add a second dock (available at
sharkaccessories.com)
5 ft.
3 ft.
3 ft.
EASE OF A ROBOT. PERFORMANCE OF A SHARK.™
DOORWAY THRESHOLDS
Your robot can easily climb over most common
thresholds. However, in some situations they
may present a challenge. Use BotBoundary
strips to block o these areas.
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot.
TIPS AND TRICKS FOR
GREAT PERFORMANCE
CORDS AND OBSTRUCTIONS
Always prep your home before cleaning.
Some furniture or loose cords may create
problems for your robot. Clear away cords
and obstructions or block o the area with
the included BotBoundary™ strips.
Before Prep Robot Friendly
RV750_POPM_INSRT_OG_REV_180620
ION
™
ROBOT