ASSEMBLY 1 2 (Click) 3 (Click) O REMOVE the Intelli-Mop™ T Head, press the release button on front of the unit. Filling the Water Tank Turn the water tank cap counterclockwise to remove. Use the filling flask to pour water into the tank. Do not overfill. Replace the cap on the water tank. We recommend using distilled water to prolong the life of your Shark Pro Steam Mop. NOTE: Sweep or vacuum your floors prior to cleaning with your Steam Mop.
For questions or to register your product, contact us at: 1-800-798-7398 or visit us online at sharkclean.
Please be sure to read the enclosed Owner’s Guide prior to using your unit. PRO STEAM MOP With Lift-Away® QUICK START GUIDE Use this Quick Start Guide to learn about your new Pro Steam Mop’s great features.
WHAT’S INSIDE: A Steam Mop Handle A B Steam Mop Body B C Steam Mop Lift-Away® D Intelli-Mop™ Head E Dirt Grip™ Pad (x1) C F Filling Flask G Concentrator Nozzle H Garment Steamer I Triangle Head with Steam Blaster™ J Triangle Pad with Scrubber D E F G H I J For additional parts and accessories, visit sharkclean.com ©2016 SharkNinja Operating LLC. Shark, Intelligent Steam Control, Lift-Away, and Steam Pocket are registered trademarks of SharkNinja Operating LLC.
CLEANING With the Intelli-Mop™ Head, you can quickly and easily attach and release the Dirt Grip™ Pads without touching them. No more wrestling with dirty, wet pads. The Dirt Grip Pads are double-sided, washable and reusable. For pad attachment and removal instructions see the following page. USING YOUR PRO STEAM MOP Your Pro Steam Mop is ideal for deep cleaning and cutting through dirt and grime in high-traffic areas, as well as for sanitizing* floors.
ABOVE-FLOOR CLEANING Remove the Handheld Steamer by pressing the release button and pulling it away from the cradle. Note: In Handheld Mode, the STEAM CONTROL is preset to SCRUB to optimize above-floor cleaning and garment steaming. Snap the desired accessory into the main nozzle of the Handheld Steamer. Then squeeze the steam trigger to activate steam. Using 3-to-5-second bursts of the trigger will allow you to steam longer and with more control.
INTELLI-MOP™ HEAD TECHNOLOGY TOUCH-FREE PAD ATTACHMENT 1 2 1. Lift the mop straight up by the handle until the Intelli-Mop Head is hanging straight down. Center the mop head above the pad. Press down the release buttons on the sides of the head post, and both sides of the mop head will drop open. 3 3. Gently press the Intelli-Mop Head to the floor on one side of the pad, and that side will click into place. 2. Slip the Intelli-Mop Head’s 4 corner tabs into the 4 corner pockets of the Dirt Grip™ Pad.
DIRT GRIP™ PADS DOUBLE-SIDED, WASHABLE, REUSABLE Our washable Dirt Grip Pads are made with fibers specially designed to absorb and trap dirt. This gives your floors an amazing clean, with minimal streaking and short dry times. For best cleaning results, we recommend replacing your Dirt Grip Pads following 20 normal uses. PAD CARE Machine wash the Dirt Grip Pads separately with warm water using liquid detergent. NEVER USE BLEACH, POWDERED DETERGENT, OR FABRIC SOFTENERS as they may damage the Dirt Grip Pads.
