Use and Care Manual

10sharkclean.com
Assembling and Using Your Spray Pocket
™
Mop
ASSEMBLY
1 Slide the Genius
™
Mop Head post into the Spray
Pocket Mop body until you hear it click securely into
place. Next, slide the Spray Pocket Mop handle into
the Spray Pocket Mop body until it clicks securely
into place. Attach the spray bottle and clip to the mop
handle.
2 To attach the Dirt Grip
™
pad, spread the pad on the
floor with the pocket side up. Center the Genius Mop
head above the pad, then press the pad release
button on the back of the Spray Pocket Mop body
(fig. 16). Both sides of the head will drop open. Slip
the Genius Mop Head’s four corner tabs into the four
corner pockets of the pad. Gently press one side of
the head to the floor until that side clicks into place.
Flip the head over and repeat on the other side.
3 To remove the Dirt Grip pad, lift the Spray Pocket
Mop straight up by the handle until the Genius Mop
Head is hanging straight down. Press the pad release
button on the back of the mop body, and both sides
of the Genius Mop Head will drop open, releasing the
pad.
4 To remove the Genius Mop Head, press the mop head
release button on the Spray Pocket Mop body.
5 If the Genius Mop Head is not attached to the mop,
the pad can still be removed. Press the two red
secondary pad release buttons located on the sides
of the Genius Mop Head post to release the pad.
USE
1 The Spray Pocket Mop is a ready-to-grab floor cleaner
that is great for quick, everyday cleaning jobs. Attach
the Genius Mop Head and a pad, and you're ready to
quickly wipe away spills and dirt.
2 The spray bottle clips onto the handle of the Spray
Pocket Mop for easy use, and can be stored there
when not in use. The bottle comes pre-filled with
cleaner. You can refill the bottle with the cleaner of
your choice.
fig. 16