Use and Care Manual

8sharkclean.com
TO SANITIZE* WITH THE STEAM MOP USING THE GENIUS
™
MOP HEAD AND THE DIRT GRIP
™
PAD:
1 Attach a clean Dirt Grip pad to the Genius Mop Head.
2 Press the Steam Button on the mop body to activate.
3 Wait 30 seconds for the unit to begin producing steam.
4 Start mopping on an appropriate sealed hard-floor surface with a forward and backward motion. After three minutes,
your unit is ready to be used to sanitize.
5 Using a forward and backward motion, move the unit over the area you seek to sanitize. Repeat at least 15 times.
* Sanitization studies were conducted under controlled test conditions. Household conditions and results may vary.
Genius Mop Head only when used with Steam Mop. Not in Steam Blaster
™
mode.
Automatic Steam Control
SETTING IDEAL FOR THESE SEALED
SURFACES
RECOMMENDED USAGE
1 setting
Automatic Steam
Control
Laminate
Hardwood
Marble
Tile
Stone
Cleaning sealed surfaces and large areas
Basic, everyday cleaning
Removing spots and smaller messes
Cleaning moderate and heavy traffic areas
Steam Blaster
™
For an extra burst of steam, you can use the Steam Blaster feature. Follow the instructions
found on the “Using your Steam Pocket
®
Mop” page.