STEAM & SCRUB Scrubbing & Sanitizing Steam Blaster Mop S7201 Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • HOUSEHOLD USE ONLY This steam mop has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. It is not recommended to use an extension cord with this product.
GETTING STARTED ASSEMBLING YOUR STEAM & SCRUB When assembling your steam mop, there may be a little water in or around the water tank. This is because we test all our steam mops before you buy them, so you get a quality Shark ® Steam & Scrub steam mop. a i j e g* c b *Number of pads included in the box is dependent on the model. fig. 2 fig. 1 h STEAM MOP ASSEMBLY 1 Insert the mop handle into the steam mop body until it clicks into place. (fig.
USING YOUR STEAM & SCRUB INTELLIGENT STEAM CONTROL® The Shark ® Steam & Scrub steam mop has 3 unique Intelligent Steam Control settings so you can select the ideal amount of steam to use for each cleaning task. In NORMAL mode, the pads will spin faster and more steam will be produced than in LIGHT mode. In DEEP mode, the pads will spin the fastest and the maximum amount of steam will be produced. See below for tips on when to use each setting. SETTING LIGHT NORMAL fig. 5 fig.
CARING FOR YOUR STEAM & SCRUB ORDERING ADDITIONAL ACCESSORIES ACCESSORY Filling Flask Makes it simple and convenient to fill the water tank. fig. 11 Dirt Grip® Pads fig. 12 Easy-to-attach, reusable pads feature a super-absorbent microfiber for locking in moisture and dirt, and scrubbing material for breaking up tough, stuck-on stains. fig. 9 fig. 10 AFTER USE AND STORAGE 1 Press the mode button until the settings lights start to blink, indicating that you are in Standby mode.
TROUBLESHOOTING PROBLEM POSSIBLE REASONS & SOLUTIONS The steam mop isn’t producing any steam. The steam mop should be securely plugged into an electrical outlet. Check your fuse or circuit breaker or try a different outlet. Make sure the water tank is full, the unit is plugged in, and the mode button is illuminated. If the settings lights are off, try a different electrical outlet. If the settings lights are blinking, press the mode button to select a steam setting.
NOTES s h a r kc l e a n . c o m NOTES s h a r kc l e a n .
ONE (1) YEAR LIMITED WARRANTY The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
*Sanitization studies were conducted under controlled test conditions. Household conditions and results may vary. With mop head in DEEP mode. PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.