OWNER’S MANUAL Model SC710 S 120V., 60Hz., 1000 Watts EURO-PRO Operating LLC Boston, MA, 02465 1 (800) 798-7398 www.sharkcompany.
IMPORTANT SAFETY INSTRUCTIONS Model SC710 S When using an electrical appliance, basic precautions should be followed, including the following: Read all instructions carefully before using the Hand Held Super Steamer Warning: To reduce the risk of fire, electric shock, or injury: To reduce the risk of fire, electric shock, or injury: 1. Use the steam cleaner only for its intended use. Do not use outdoors. 2. To protect against a risk of electric shock.
USAGE SUGGESTIONS FOR YOUR SUPER STEAMER CAUTION: This appliance must be unplugged from the electrical outlet and allowed to cool down before all cleaning and maintenance tasks. • Let the appliance cool down completely before cleaning or storing. • Empty all water from the water tank after each use. • Store in a dry, cool place. • A periodic rinse of your steam cleaner will free it from deposits. This is recommended every 10-15 tankfulls to free up any scale deposits.
GETTING TO KNOW YOUR SHARK SUPER STEAMER USAGE SUGGESTIONS FOR YOUR SUPER STEAMER Upholstery Use the steam diffuser with the cleaning cloth. Use fast, light strokes, avoid getting the fabric wet. Be patient with stubborn spots; work on a spot gently for no more than a minute at a time, then wait five minutes for the area to dry and repeat. Use circular movements or back-and-forth and side-to-side movements to get all sides of surface fibers.
OPERATING INSTRUCTIONS Small Detail Brush / Angle Adapter Both the angle adapter and the small detail brush can be used on the concentrator nozzle. If using with the concentrator nozzle, push the attachment onto the end of the nozzle. FEATURES The SHARK SUPER STEAMER utilizes pressurized steam to remove tough grease,dirt and grime. Steam is nature’s purest and most powerful cleaner for safely cleaning all hard surfaces in your home without harsh chemicals, thus being perfectly ecological.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS How To Assemble & Use CAUTION: Always ensure the unit is “UNPLUGGED” from the wall receptacle prior to filling or re-filling the water tank. Failure to follow these steps will cause the water tank to overfill. Step 1: Before filling the steam cleaner, make sure that the unit is NOT plugged in. Step 2: Turn Safety Cap counter clockwise until removed. Step 3: Place funnel in the tank and add water. Do not overfill.
