SJHE-1500 SJPE-1650 OPERATOR’S MANUAL 89143220-3 MODEL # ORDER # MODEL # ORDER # SJHE-1500 1.106-045.0 SJPE-1650 1.106-048.0 SJHE-1500-B 1.107-199.0 SJPE-1650-B 1.107-203.0 SJHE-1500-C 1.107-200.0 SJPE-1650-C 1.107-204.0 To locate your local Shark Commercial Pressure Washer Dealer nearest you, visit www.sharkpw.com 8.914-322.
CONTENTS Introduction..................................................................................................................................... 3 Machine Safety............................................................................................................................ 3-4 Assembly........................................................................................................................................ 4 Pre-Operation Check...........................................
Shark Jetters OPERATOR’S MANUAL ® INTRODUCTION WARNING Thank you for purchasing a Shark® Jetters This manual covers the operation and maintenance of models SJHE-1500 and SJPE-1650. All information in this manual is based on the latest product information available at the time of printing. Shark® Pressure Washers reserves the right to make changes at any time without incurring any obligation.
Shark Jetters OPERATOR’S MANUAL ® 9. Do not operate with the valve in the off position for extensive periods of time as this may cause damage to the pump. 10. The best insurance against an accident is precaution and knowledge of the machine. 11. Shark® will not be liable for any changes made to our standard machines or any components not purchased from Shark®. 12. Be certain all fittings are secured before using pressure washer. 13. Never run pump dry. 14.
Shark Jetters OPERATOR’S MANUAL ® SJHE-1500 COMPONENT IDENTIFICATION AND USE DRAIN CLEANING Through Floor Drain Through Roof Vent P Foot Pedal (Optional) SF Foot Pedal (Optional) Jetter Hose S FP Roof Vent Drain 89143220 4 Jetter Hose Roof Pressure Valve Motor Backflow Preventer Unloader Valve GFCI Pressure Gauge 89143220-5 Inline Strainer Pulse Control Valve Pump SJHE-1500 & SJPE-1650 • 8.914-322.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® SJPE-1650 COMPONENT IDENTIFICATION AND USE DRAIN CLEANING Through Floor Drain Through Roof Vent Jetter Hose Water Supply Hose Foot Pedal (optional) 89143220 4 S FP S F P Roof Vent Jetter Hose Jetter Control Valve Roof Foot Pedal (Optional) Floor Drain 89143220 6 Detergent Injector Motor Pulse Control Valve Unloader Valve Pressure Gauge Inline Strainer Backflow Preventer GFCI Water Supply Hose Hose Reel Pump SJHE-1500 & SJPE-1650 • 8.914-322.
Shark Jetters OPERATOR’S MANUAL ® PART NUMBER ADAPTER SIZE (FPT) 8.705-364.0 1/4" x 1/4" 8.705-366.0 3/8" x 3/8" 8.705-369.0 1/2" x 1/2" 8.705-371.0 3/4" x 3/4" Coupling two different size hoses can be done through the spray wand trigger or foot pedal. It is not advisable to have two different hose sizes coupled in a drain line. There is a tremendous loss of pressure when combined, aside from the difficulty of getting around bends. The 3/8" (9.925 mm) and 1/4" (6.
___ ___ ___ ___ ___ Shark Jetters OPERATOR’S MANUAL ® Check the labels of any substance you will spray. If the label recommends any antidote or treatment, be ready to use it. Check that all lines and hoses are clear. Check that the machine is connected to an adequate water supply and that the water supply is on. Check that traffic has not made the hose weak, worn or damaged. Check the hose for pinching or kinking. Replace any damaged hose. Tighten all fluid connections securely.
Shark Jetters OPERATOR’S MANUAL ® surface to be cleaned. When cleaning with a detergent, apply from bottom up with an even left to right movement. Rinse from top down with a similar motion. This will help reduce potential streaking. Detergent Injector (Optional) Refer to Component Indentification for placement of injector. The detergent injector is an option with the SJHE-1500 and SJPE-1650.
Shark Jetters OPERATOR’S MANUAL ® EXPLODED VIEW SJHE-1500 33 19 38 7 18 1 8 40 17 39 7 15 42 34 10 2 20 28 16 27 23 6 29 22 21 3 41 15 4 37 31 11 14 5 9 12 21 13 24 30 25 35 32 30 35 P SF Foot Pedal Assembly (Optional) 35 35 30 89143220-1 SJHE-1500 & SJPE-1650 • 8.914-322.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® 11 EXPLODED VIEW PARTS LIST SJHE-1500 ITEM PART NO. 1 2 3 4 8.715-944.0 9.804-516.0 8.712-135.0 8.715-297.0 DESCRIPTION GFCI, 120V 15A W/36' 12-3 Cord QTY ITEM PART NO. DESCRIPTION QTY 20 9.802-207.0 Clip, Round, 0.56 I.D. 1 1 21 9.802-201.0 Clamp, Screw, #6 2 Motor, 1.5 HP 1 PH, 1725 RPM, Magnetek TEFC 1 22 8.706-828.0 Elbow, 3/8" Street 1 23 8.706-337.
Shark Jetters OPERATOR’S MANUAL ® EXPLODED VIEW SJPE-1650 50 7 17 54 8 36 19 17 35 7 28 15 16 23 6 55 51 56 10 1 18 61 2 20 27 29 22 21 38 3 15 53 60 4 11 5 14 9 12 21 31 24 13 25 Use to connect Hose to Hose reel 45 45 62 26 30 39 29 32 30 47 40 49 30 59 45 48 46 57 44 58 37 34 33 S F P 43 89143220-2 Foot Pedal Assembly (Optional) 41 SJHE-1500 & SJPE-1650 • 8.914-322.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® 13 EXPLODED VIEW PARTS LIST SJPE-1650 ITEM PART NO. 1 2 3 4 8.715-944.0 9.804-516.0 8.712-135.0 8.715-297.0 DESCRIPTION GFCI, 120V 15A W/36' 12-3 Cord QTY 1 Motor, 1.5 HP 1 PH 1725 RPM, Magnetek TEFC 1 Gauge, Pressure Panel Mount, 0-2000 PSI 1 Pump, AR XTA2G15EBA-F8, Electric 1725 RPM 1 5 8.707-063.0 Strainer, 1/2" 1 6 8.750-297.0 Unloader, VRT 3, 8 GPM @2320 PSI 1 ITEM PART NO. DESCRIPTION QTY 29 9.803-551.0 Screw, 5/16" x 3/4" Whiz Loc 7 30 9.
Shark Jetters OPERATOR’S MANUAL ® OPTIONAL SHR-200FP HOSE REEL WITH FOOT PEDAL EXPLODED VIEW & PARTS LIST 13 8 9 7 89143220-8 10 20 6 3 12 18 1 21 2 11 19 11 16 10 12 11 15 18 11 11 12 5 12 4 3 6 17 89143220-9 14 18 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY 1 8.911-637.0 Bracket, Hose Reel Mount 1 12 9.802-776.0 Nut, 5/16" ESNA 12 2 8.940-374.0 Label, SHR-200 1 13 8.911-636.0 Hose Reel Guard 1 3 8.707-186.
Shark Jetters OPERATOR’S MANUAL ® 15 HOSE AND SPRAY GUN ASSEMBLY (OPTIONAL) SJHE-1500 & SJPE-1650 5 1 2 4 3 89143220-10 ITEM PART NO. 1 2 3 8.711-311.0 8.710-384.0 8.739-030.0 DESCRIPTION QTY Lance, 18" Molded Grip AL-3929.11 1 Gun, ST-1500, 5000 PSI, 10.4 GPM 1 Hose, 3/8" x 25', 1 Wire, TS, Legacy 50 x SW ITEM PART NO. DESCRIPTION QTY 4 8.707-182.0 Coupler, 3/8" Female Screw Type 7640 1 5 8.712-421.0 Nozzle Holder, Adjustable AL-TR9-4701.12 1 8.711-368.
Shark Jetters OPERATOR’S MANUAL ® SPECIFICATIONS NOZZLES JETTING NOZZLES Part Number Size Thread Size Forward Jet Rear Jets Max PSI Available In Set 8.710-877.0 6.0 1/4" 1 4 4200 9.803-321.0 8.710-878.0 4.5 1/4" 1 3 4200 9.803-319.0 8.710-879.0 8.0 1/4" 1 3 4200 9.803-322.0 8.710-886.0 8.5 3/8" 1 4 4200 9.803-322.0 8.751-944.0 3.0 1/8" 0 3 5100 9.803-318.0 8.751-945.0 3.0 1/8" 1 3 5100 9.803-318.0 8.751-946.0 3.0 1/4" 0 3 5100 9.803-318.0 8.
Shark Jetters OPERATOR’S MANUAL ® SPECIFICATIONS JETTER HOSES, ADAPTERS AND BUSHINGS JETTER HOSES Part Number Diameter Length (ft) Max PSI End 1 End 2 8.751-927.0 1/8" 25 4800 1/8" MPT 1/8" MPT 8.751-927.0 1/8" 50 4800 1/8" MPT 1/8" MPT 8.751-929.0 1/8" 75 4800 1/8" MPT 1/8" MPT 8.705-601.0 1/8" 25 4800 1/4" MPT 1/8" MPT 8.705-602.0 1/8" 50 4800 1/4" MPT 1/8" MPT 8.705-603.0 1/8" 100 4800 1/4" MPT 1/8" MPT 8.705-607.0 1/4" 50 2600 1/4" MPT 1/4" MPT 8.
Shark Jetters OPERATOR’S MANUAL ® 18 PUMP MODEL NO. AR XTVA2G15EBA-F8 JET SET MODEL SJHE-1500& SJPE-1650 PART #8.702-504.0 32 31 37 81 30 82 17 29 23 18 19 36 28 20 26 22 21 24 40 11 12 13 14 27 16 "E" version Ø24mm 2 8 7 38 15 39 9 84 38 47 48 39 75 77 80 79 10 73 41 42 74 F8 62 85 1 78 SJHE-1500 & SJPE-1650 • 8.914-322.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® 19 PUMP MODEL NO. AR XTVA2G15EBA-F8 JET SET MODEL SJHE-1500 & SJPE-1650 PART #8.702-504.0 ITEM PART NO. 1 DESCRIPTION 83-680570 QTY ITEM PART NO. Head Bolt TCEI M6x60 Brass 6 36 83-1320140 DESCRIPTION QTY Con Rod, Bronze 3 2 83-620301 Tap Plug 1/8" G (Optional) 1 37 83-1260040 Rear Gasket Cover 1 7 83-1260160 Valve Cap 6 38 83-740290 O-Ring Ø14 x 178 3 8 83-960160 O-Ring Ø17.86 x 2.
Shark Jetters ® OPERATOR’S MANUAL TROUBLESHOOTING These troubleshooting procedures cover pump malfunctions, delivery problems and charge system malfunction. WARNING: Before attempting any repairs or maintenance, make sure machine is shut off. PROBLEM POSSIBLE CAUSE REPAIR LOW PRESSURE Worn or oversized nozzle Replace worn nozzle. Check nozzle size. Clogged water supply hose, inlet strainer or kinked hose Clean or replace strainers. Worn or damaged piston cups Replace piston cups.
Shark Jetters OPERATOR’S MANUAL ® 21 TROUBLESHOOTING Detergent System Malfunction PROBLEM POSSIBLE CAUSE REPAIR WASHER FAILS TO DRAW DETERGENT Detergent metering valve close, clogged or defective Open detergent metering valve, following procedure in operating instructions. Back pressure in hose (when using additional lengths of pressure hose) Contact dealer for proper injector size when adding lengths of hose.
LIMITED NEW PRODUCT WARRANTY SHARK JETTERS Phone: 800-771-1881 Fax: 877-526-3246 www.sharkpw.com WHAT THIS WARRANTY COVERS All Shark Jetters are warranted by Shark to the original purchaser to be free from defects in materials and workmanship under normal use, for the periods specified below. This Limited Warranty, subject to the exclusions shown below, is calculated from the date of the original purchase, and applies to the original components only.
SHARK® JETTERS SJHE-1500 & SJPE-1650 • 8.914-322.
