SJPE-1500 OPERATOR’S MANUAL FE SA W SJ IN N R G 89143239-8 MODEL # ORDER # SJPE-1500 1.106-046.0 SJPE-1500-B 1.107-201.0 SJPE-1500-C 1.107-202.0 To locate your local Shark Commercial Pressure Washer Dealer nearest you, visit www.sharkpw.com 8.914-323.
CONTENTS Introduction & Machine Safety Information....................................................................................... 3 Assembly.......................................................................................................................................... 4 Pre-Operation Check........................................................................................................................ 4 Set-up Procedures............................................................
Shark Jetters OPERATOR’S MANUAL ® INTRODUCTION WARNING: Keep water spray away from electric wiring or fatal electric shock may result. 4. To protect the operator from electrical shock, the machine must be electrically grounded. It KEEP WATER SPRAY is the responsibility of the owner AWAY FROM ELECto connect this machine to a UL TRICAL WIRING. grounded receptacle of proper voltage and amperage ratings. Do not spray water on or near electrical components.
Shark Jetters OPERATOR’S MANUAL ® 17. When the machine is working, do not cover or place in a closed space where ventilation is insufficient. Hose Selection Guide ASSEMBLY Upon arrival, inspect the shipping crate for damages. Uncrate and examine all parts. Note any damage to machine or components for claims against freight carrier. Jets have antifreeze in the pump to protect it from freezing conditions during shipment and storage.
Shark Jetters OPERATOR’S MANUAL ® COMPONENT IDENTIFICATION AND USE DRAIN CLEANING Pulse Control Valve Hose Reel Tool Box Pressure Control Valve Unloader Valve Motor GFCI P J S Pressure Gauge Foot Pedal (optional) Anti-Siphon Valve Pump Inlet Filter 89143230-3 Drain SJPE-1500 • 8.914-323.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® COMPONENT IDENTIFICATION AND USE DRAIN CLEANING THROUGH ROOF VENT Roof Vent Foot Pedal (optional) Roof Hose Line to Foot Pedal on Roof Hose Reel Pressure Control Valve Toolbox Unloader Valve Motor GFCI Pulse Control Valve S Pump Pressure Gauge 89143239-4 Inlet Strainer SJPE-1500 • 8.914-323.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® is used between the hose and quick connect. Adapters may be ordered separately. Often, the 1/8" hose is used in conjunction with the spray wand trigger to give the operator finger tip control. Remove the spray wand from the trigger and attach the 1/8" hose using the appropriate adapter. A SCP-1 valve is available that can be used as a safety shut-off valve for all hose sizes. See foot pedal section for installation and operating instructions.
Shark Jetters OPERATOR’S MANUAL ® OPERATING INSTRUCTIONS ❑ Check all hoses for wear and damage. Tighten all connections securely. ❑ Check oil level of pump. ❑ To begin, turn the water faucet on fully and purge air from system. ❑ Insert end of the jet hose 2 to 3 feet into the drain line. Then turn the valve on. Warning: Never point the end of the jet hose at a person while operating. Start-Up 1. Make sure that the ball valve is turned on and the water is flowing. 2.
Shark Jetters OPERATOR’S MANUAL ® reduce potential streaking. Always apply soap to a dry surface. This will enhance penetration and detergent cling and reduce dilution of detergent with an already wet surface. If you have the dual-lance wand (optional with the SJPE-1500) you may draw detergents through the spray wand in conjunction with the detergent injector mounted on the machine. First set up the detergent injector system (see Detergent Injector).
Shark Jetters OPERATOR’S MANUAL ® Used To Connect Hose to Hose Reel 7 50 EXPLODED VIEW 63 SJPE-1500 56 38 53 AT G A YW A 10 51 32 31 55 61 54 27 33 34 45 45 60 18 30 54 55 43 6 33 8 A W N G N 13 13 20 9 28 3 35 48 46 32 36 22 19 52 24 42 11 23 21 17 1 4 18 2 29 59 12 41 26 40 49 47 14 28 15 58 39 33 25 45 SJ P 0 40 41 89143230-1 Foot Pedal Assembly (Optional) 44 33 45 5 16 42 SJPE-1500 • 8.914-323.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® 11 EXPLODED VIEW PARTS LIST SJPE-1500 ITEM PART NO. DESCRIPTION QTY 1 8.750-297.0 Unloader, VRT 3, 8 GPM @2320 PSI 2 8.715-297.0 Pump, AR XTA2G15EBA-F8, Elect 1725 RPM 3 9.804-516.0 9.802-514.0 Motor, 1.5 HP 1 PH 1725 RPM, Magnetek TEFC 1 ▲ Strain Relief, LT 1 4 8.712-135.0 1 1 ITEM PART NO. DESCRIPTION QTY 29 8.706-984.0 Adapter, 1/2" x 1/2" Pipe 1 30 8.707-185.0 Plug, QDISC.
Shark Jetters OPERATOR’S MANUAL ® PUMP MODEL NO. AR XTA2G15EBA-F8 JET SET MODEL SJPE-1500 PART #8.702-504.0 32 31 37 81 30 82 17 29 23 18 19 36 28 20 26 22 21 24 27 16 25 14 40 12 13 "E" version Ø24mm 11 2 84 38 8 7 38 15 77 47 48 39 75 39 80 79 10 9 73 41 42 74 F8 62 85 1 78 SJPE-1500 • 8.914-323.0 • REV.
Shark Jetters OPERATOR’S MANUAL ® 13 PUMP MODEL NO. AR XTA2G15EBA-F8 JET SET MODEL SJPE-1500 PART #8.702-504.0 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY 1 83-680570 Head Bolt TCEI M6x60 Brass 6 36 8.718-393.0 Con Rod, Bronze 3 2 83-620301 Tap Plug 1/8" G (optional) 1 37 8.718-383.0 Rear Gasket Cover 1 7 83-1260160 Valve Cap 6 38 83-740290 O-Ring Ø14 x 178 3 8 8.718-474.0 O-Ring Ø17.86x2.62 6 39 8.718-472.
Shark Jetters OPERATOR’S MANUAL ® OPTIONAL SHR-200CP HOSE REEL WITH FOOT PEDAL EXPLODED VIEW & PARTS LIST 13 8 9 10 89143230-5 7 20 3 18 12 1 19 6 21 11 11 2 16 10 11 12 15 11 12 11 12 5 18 4 3 18 6 17 14 DESCRIPTION QTY 1 8.911-637.0 Bracket, Hose Reel Mount 1 12 9.802-776.0 Nut, 5/16" ESNA 12 2 8.940-374.0 Label, SHR-200 1 13 8.911-636.0 Hose Reel Guard 1 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. 89143230-6 3 8.707-186.
Shark Jetters OPERATOR’S MANUAL ® HOSE AND SPRAY GUN ASSEMBLY (OPTIONAL) SJPE-1500 5 1 2 4 3 89143230-7 ITEM PART NO. DESCRIPTION QTY 1 8.711-311.0 Lance, 18" Molded Grip AL-3929.11 2 8.710-384.0 Spray Gun, ST-1500, 5000 PSI, 10.4 GPM 1 3 8.739-030.0 Hose, 3/8" x 25', 1 Wire, TS, Legacy, 50 x SW 1 4 8.707-182.0 Coupler, 3/8" Female Screw Type 7640 1 5 8.712-421.0 Nozzle Holder, Adjustable AL-TR9-4701.12 1 8.711-368.0 ▲ Nozzle Only, SA 1/4", MEG 1502.
Shark Jetters OPERATOR’S MANUAL ® SPECIFICATIONS NOZZLES JETTING NOZZLES Part Number Size Thread Size Forward Jet Rear Jets Max PSI Available In Set 8.710-877.0 6.0 1/4" 1 4 4200 9.803-321.0 8.710-878.0 4.5 1/4" 1 3 4200 9.803-319.0 8.710-879.0 8.0 1/4" 1 3 4200 9.803-322.0 8.710-886.0 8.5 3/8" 1 4 4200 9.803-322.0 8.751-944.0 3.0 1/8" 0 3 5100 9.803-318.0 8.751-945.0 3.0 1/8" 1 3 5100 9.803-318.0 8.751-946.0 3.0 1/4" 0 3 5100 9.803-318.0 8.
Shark Jetters OPERATOR’S MANUAL ® SPECIFICATIONS JETTER HOSES, ADAPTERS AND BUSHINGS JETTER HOSES Part Number Diameter Length (ft) Max PSI End 1 End 2 8.751-927.0 1/8" 25 4800 1/8" MPT 1/8" MPT 8.751-927.0 1/8" 50 4800 1/8" MPT 1/8" MPT 8.751-929.0 1/8" 75 4800 1/8" MPT 1/8" MPT 8.705-601.0 1/8" 25 4800 1/4" MPT 1/8" MPT 8.705-602.0 1/8" 50 4800 1/4" MPT 1/8" MPT 8.705-603.0 1/8" 100 4800 1/4" MPT 1/8" MPT 8.705-607.0 1/4" 50 2600 1/4" MPT 1/4" MPT 8.
Shark Jetters OPERATOR’S MANUAL ® TROUBLESHOOTING These troubleshooting procedures cover pump malfunctions, delivery problems and charge system malfunction. Warning: Before attempting any repairs or maintenance, make sure machine is shut off. PROBLEM POSSIBLE CAUSE REPAIR LOW PRESSURE Worn or oversized nozzle Replace worn nozzle. Check nozzle size. Clogged water and/or detergent inlet strainer Clean or replace strainers. Worn or damaged piston cups Replace piston cups.
Shark Jetters OPERATOR’S MANUAL ® 19 TROUBLESHOOTING Detergent System Malfunction PROBLEM POSSIBLE CAUSE REPAIR WASHER FAILS TO DRAW DETERGENT Detergent metering valve closed or valve clogged or defective Open detergent metering valve, following procedure in operating instructions. Back pressure in hose (when using additional lengths of pressure hose) Contact dealer for proper injector size when adding lengths of hose.
LIMITED NEW PRODUCT WARRANTY SHARK JETTERS Phone: 800-771-1881 Fax: 877-526-3246 www.sharkpw.com WHAT THIS WARRANTY COVERS All Shark Jetters are warranted by Shark to the original purchaser to be free from defects in materials and workmanship under normal use, for the periods specified below. This Limited Warranty, subject to the exclusions shown below, is calculated from the date of the original purchase, and applies to the original components only.
SHARK ® JETTERS SJPE-1500 • 8.914-323.0 • PRINTED IN USA • REV.