Operation Manual

3
www.sharkclean.com
ASSEMBLY
1 Insert the handle into the neck of the main
body of the Steam & Spray
™
Mop. Push the mop
handle and main body of the appliance together
until you hear it “click” into place. (Fig. 1)
2 Insert the power cord plug into the power cord
receptacle on the unit. (Fig. 2)
3 Hold the power cord and wrap it around the cord
holders. (Fig. 3)
4 Remove the battery cover and insert the 4 AA
batteries. (Fig. 4) Replace the battery cover.
5 Place the Steam & Spray
™
Mop unit on top of the
Cleaning Pad. (Fig. 5)
If using the washable cleaning pad, ensure that
the Velcro
®
side is facing up and the tab is in
the back. If using the SaniFiber
™
cleaning pad,
ensure the logo side is facing up.
fig. 1
fig. 3
fig. 5
fig. 4
fig. 2
IMPORTANT: Always make sure that the
Steam & Spray
™
Mop is UNPLUGGED from the
wall when not in use. Never change or remove
the cleaning pad when the appliance is plugged
into the wall. Use ONLY Steam Energized
™
Cleanser. The addition of other chemicals or
cleaning solutions may damage the appliance,
void the warranty and could be unsafe for you
and your family.
Cleaning Pad