PERFORMANCE LIFT-AWAY ® ADV UV850 Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. 14. D O NOT put any objects into nozzle or accessory openings.
ASSEMBLY ASSEMBLY 3 (Click) 2 (Click) Upper Cord Hook Tool Storage Posts 4 (Click) Lower Cord Hook 1 (Click) POWER CORD 1. Place Pod down onto Nozzle. 2. Insert Wand into Pod. 3. Insert Handle into wand. 4. Attach Hose to back of pod. For proper operation, ensure all parts are firmly clicked into place. UPPER CORD HOOK For cord access, rotate upper hook down and remove cord. s h a r kc l e a n . c o m CORD HOLDER Use cord holder on the side of wand to hold cord in place while vacuuming.
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER/SURFACE SWITCH Select surface setting: O Power Off I Hard Floor For hard floors and small area rugs. II C arpet For carpets. SUCTION CONTROL The Suction Control Slider located on the handle allows you to adjust the suction depending on the floor type. MIN: to reduce suction and increase maneuverability on carpets. UPRIGHT MODE To engage Brushrolls, select a surface setting, step on floor nozzle and tilt handle back firmly.
EMPTYING THE DUST CUP IMPORTANT: Unplug the power cord before performing any maintenance. Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup reaches the MAX fill line. CLEANING THE FILTERS Regularly rinse the filters to maintain your vacuum's suction power. Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts.
MAINTENANCE CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE SELF-CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue vacuuming, using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll.
INCLUDED ACCESSORIES A B C revice Tool C This slender tool offers extended reach to access corners, baseboards, tight spaces, and ceilings. A et Multi-Tool P A single convertible tool for cleaning tough pet messes two ways: use the stiff bristle brush to clean stuck-on debris, or take off the bristles to reveal an upholstery tool perfect for removing stubborn pet hair and large piles of debris.
FIVE (5) YEAR LIMITED WARRANTY REGISTER YOUR PURCHASE registeryourshark.com The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. Shark® Performance Lift-Away® ADV Upright Vacuum. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents © 2021 SharkNinja Operating LLC.
