WANDVAC® SYSTEM Cordless Vacuum WS630 Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS FOR HOUSEHOLD USE ONLY • PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM. 20. DO NOT place vacuum on unstable surfaces such as chairs or tables. 21. DO NOT use to pick up: If the charging cord plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. To reduce the risk of shock and unintended operation, turn off power and remove the battery before servicing.
ASSEMBLY 1. Slide the Wand onto the neck of the PowerFins Floor Nozzle until it clicks into place. 2. Align the Hand Vacuum nozzle opening with the top of the wand and slide it on until it clicks into place. 3. Make sure the Dock Plate is facing upright. Slide the Charging Post into the slot on back of dock until it clicks. LI-ION BATTERY 4. Place the dock on the floor near a wall outlet. Plug the Wall Charger into the outlet, then connect the cord to the port on the back of the charging post.
CHARGING CHARGING CHARGING WHILE IN STORAGE MODE STORAGE HOOK CONTACTS UPRIGHT DOCK CHARGING STORAGE POST CHARGING THE HAND VACUUM REMOVING THE BATTERY CHARGING HAND VACUUM BATTERY To charge the hand vacuum without the dock, unplug the charger cord from the dock and connect it directly to the port on the hand vacuum, near the nozzle opening. To detach the hand vacuum, press the release buttons on both sides of the handle and lift it off the wand. (See previous page.
USING YOUR VACUUM USING YOUR VACUUM CONTROLS CLEANING MODES POWER Press the On/Off button on the handle to turn on power. To turn off power, press the button again. BOOST MODE For an added boost of power, push and hold the Boost button on the underside of the handle. The Boost icon will blink white in this mode. Release the button to return to standard power. UPRIGHT ABOVE-FLOOR WITH HAND VACUUM Use the PowerFins floor nozzle for powerful cleaning on both bare floors and carpets.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM EMPTYING THE DUST CUP CLEANING THE DUST CUP AND FILTER 1 1. W ith the power off, slide the release button forward, and the dust cup will swing open. Tap the filter screen lightly to knock off dust and debris. 2 2. W ipe the screen inside the dust cup lightly with a dry cloth to remove dust and dirt. 1 1. With the dust cup open and the power off, press the filter release latch below the handle and pull out the filter housing.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM NOZZLE MAINTENANCE CHECKING FOR BLOCKAGES If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll. Checking for Blockages in the Hand vacuum: 1. Turn off the vacuum. 2. Remove the hand vacuum from the wand. 3. Check all intake openings to the dust cup and remove any debris or blockages. POWERFIN FLOOR NOZZLE 1. Turn off the vacuum. 2.
MAINTAINING YOUR VACUUM ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM TROUBLESHOOTING WARNING: To reduce the risk of shock and unintended operation, turn off power and remove the battery before servicing. Vacuum is not picking up debris. No suction or light suction. Third indicator light on hand vacuum is solid yellow. (Refer to Checking for Blockages section for more information.) 1. D ust cup may be full; empty dust cup. 2. Check floor nozzle for blockages; clear blockages if required. 3.
FIVE (5) YEAR LIMITED WARRANTY TWO (2) YEAR LIMITED BATTERY WARRANTY The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. The Two (2) Year VIP Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.
NOTES REGISTER YOUR PURCHASE registeryourshark.com RECORD THIS INFORMATION TECHNICAL SPECIFICATIONS Model Number: ����������������������������� Voltage: 11.1V Date Code: ��������������������������������� Date of Purchase: ��������������������������� (Keep receipt) Store of Purchase: ��������������������������� TIP: You can find the model and serial numbers on the QR code label on the bottom of the back of the hand vacuum and battery.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® vacuum. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information, visit sharkninja.
