User Guide

TOLL FREE: 1-800-798-7398
www.sharkclean.com
Lift Away
Bare Floor Nozzle
Assembly Instructions
1 From the Upright Vac mode, press the release button on the lower side of
the canister and remove the motorized floor brush. Place the bare floor
nozzle on a level floor surface, align the tube of the floor nozzle with the
tube on the detachable canister and click into place. (Fig. 1)
With the canister removed, insert the extension wand and handle directly
onto the bare floor nozzle. (Fig. 2)
2 Press the On/Off switch to the “I” position to turn the suction motor on.
PMS 2592
Ideal for bare floor cleaning and large and small particle
pick up. Low profile for easy access to any area.
OR
Fig. 1
Fig. 2
101201
SIZE: 5-1/2 x 8-1/2 in.
FRONT English
XSN350W
Care Instructions
270.9gsm white offset cover stock