Use and Care Manual
sharkclean .comsharkclean .com
NOTE: All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, turn power on,
then place foot on floor nozzle and
tilt handle back.
Select surface setting:
O Power O
I Hard Floor
For bare floors and small area rugs.
II Carpet
For carpets.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushroll is spinning and working as it should.
Solid Red: There is a jam in the brushroll area. Turn your vacuum o and remove
any blockages in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn your vacuum o and wait
a minimum of 45 minutes for it to cool down.
Press the Wand Release button on the back of
the vacuum to detach the wand from the pod.
Suction Control oers variable suction
based on your needs. Slide to MIN to reduce
suction and increase maneuverability on
carpets. Slide to MAX to increase suction on
bare floors.
With pod removed, press the Wand Release
button to detach the wand from the pod.
Press the Handle Release button on the back
of the wand to detach the handle from the wand.
Press the Lift-Away button to detach the pod
from the floor nozzle.
UPRIGHT
POWER/SURFACE SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—HANDLE
LIFT-AWAY®
ABOVE-FLOOR—WAND
SUCTION CONTROL
LIFT-AWAY®
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), set to MAX suction and Carpet.