Use and Care Manual

sharkclean .comsharkclean .com
Clean o any debris on the bristles.
Using a coin, turn locks counterclockwise, then open the cover to access Brushroll.
NOTE: Cover hinges open but is not completely removable.
If you run over a hard or sharp object or notice
a noise change while vacuuming, check for
blockages or objects caught in the brushroll.
Clear away any dust, dirt, or blockages in
Debris Intake.
To close the cover, push down until it clicks
into place, then close the locks with a coin.
DEBRIS WRAPPED AROUND BRUSHROLL DEBRIS BEHIND BRUSHROLL
CLEANING THE BRUSHROLL
CHECKING FOR BLOCKAGES
Detach hose from vacuum pod, and check hose
and opening on back of pod for blockages.
Detach wand from floor nozzle and handle, and
check both ends for blockages.
Detach wand from floor nozzle, tilt nozzle neck
back, and check opening for blockages.
Detach handle from wand and hose from the
vacuum pod, and check openings for blockages.
Detach dust cup from vacuum pod. Empty dust
cup, remove debris from lint screen, and check for
blockages.
NOTE: If any hair is wrapped around the brushroll,
extending cleaning time will allow the self-cleaning
brushroll to remove it for you. If some fibers remain
wrapped around brushroll after continued use, carefully
cut debris with scissors and remove from brushroll.
Self-Cleaning Brushroll
The self-cleaning brushroll delivers nonstop hair removal. If you run over a hard or
sharp object or notice a noise change while vacuuming, check for blockages or objects
caught in the brushroll.