Other Content

SECTION 1: THE SHARKBITE CONNECTION SYSTEM

PRODUCT DESCRIPTION PART NUMBER

STOP VALVE TEE ADAPTERS

1/4" (3/8" OD) X 1/4" (3/8" OD) X 3/8" Compression Stop Valve Tee Adaptor U3358LF

1/4" (3/8" OD) X 1/4" (3/8" OD) X 1/4" (3/8" OD) Tube Stop Valve Tee Adapter U4358LF

FAUCET CONNECTORS

1/4" (3/8" OD) X 1/2" Threaded Faucet Connector U3525LF

TOILET CONNECTORS

1/4" (3/8" OD) X 7/8" Ballcock Threads Toilet Connector U3531LF

1/4" (3/8" OD) X 7/8" Ballcock Threads Toilet Elbow U3537LF

1-G: ADDITIONAL PRODUCTS

MANIFOLDS WITH PUSH-TO-CONNECT BRANCHES

Manifolds are traditionally used in PEX systems, but this SharkBite manifold will also allow for easy incorporation into Copper or

CPVC systems. Use SharkBite push-to-connect fittings to install these manifolds anywhere in a plumbing system. All manifolds have

a 1" trunk with 3/4" tube inlets and outlets and 1/2" push-to-connect ports (2" on center).

3 Port - Open 1" trunk, 3/4" X 3/4", 3 - 1/2" branches 2" on center 22995LF

3 Port - Closed 1" trunk, 3/4" X Spun Closed, 3 - 1/2" branches 2" on center 22996LF

4 Port - Open 1" trunk, 3/4" X 3/4", 4 - 1/2" branches 2" on center 22997LF

4 Port - Closed 1" trunk, 3/4" X Spun Closed, 4 - 1/2" branches 2" on center 22998LF

WATER HAMMER ARRESTORS

Provides maintenance free, continuous protection against water hammer. The arrestor can be positioned vertically or horizontally

and the SharkBite connectors allow the arrestor to be installed in seconds, even on wet pipe.

1/2" Residential 22630LF

1/2" Commercial 22631LF

3/4" Residential 22632LF

1" Commercial 22633LF

STUB OUT ELBOWS

The SharkBite stub-out elbows come with pre-fitted mounting brackets that provide four fixed installation positions on all wooden

surfaces (studs, joists and subfloors) by simply rotating or repositioning the mounting bracket.

1/2" SB X 1/2" Copper Tube 8" Length U351LFA

PRESSURE GAUGES

1/2" SB Tee with Pressure Gauge 24436

3/4" SB Tee with Pressure Gauge 24438

1" SB Tee with Pressure Gauge 24440

1/2" CTS Pressure Gauge (inserts into any 1/2" SB fitting) 24442

3/4" CTS Pressure Gauge (inserts into any 3/4" SB fitting) 24444

TEMPERATURE GAUGES

1/2" SB Tee with Temperature Gauge 24437

3/4" SB Tee with Temperature Gauge 24439

1" SB Tee with Temperature Gauge 24441

1/2" CTS Temperature Gauge (inserts into any 1/2" SB fitting) 24443

3/4" CTS Temperature Gauge (inserts into any 3/4" SB fitting) 24445

1-H: KITS

WATER HEATER INSTALLATION KITS (KITS INCLUDE 2 SHARKBITE CONNECTOR FITTINGS AND A DISCONNECT CLIP)

1/2" X 3/4" FNPT 22604LF

3/4" X 3/4" FNPT 22441LF