Submittal Sheet

Description
The SharkBite
®
push-fit fittings allow the user to connect pipe in seconds with relative ease.
features anD benefits
SharkBite
®
Push-Fit Fittings
Specifications: HB001 • Issue Date May 2009
A Division of the Reliance Worldwide Corporation
Cash Acme • 2400 7th Avenue SW • Cullman, AL 35055-0278 • 1-877-700-4242 • Fax: [phone] • www.cashacme.com
specification
typical installation
Connecting a joint:
No. 2
Disconnecting a joint:
Instant push-fit connection for increased ease-of-use:
No soldering, clamps, unions, or glue required.
Fittings certified to 200 PSI and 200°F (93°C):
Proven durability and quality.
Fits copper tubing, and CTS CPVC and PEX:
Connects all three types in any combination.
Integral tube liner for PEX installations:
Integrated design means no loose components, ensures secure, reliable connection.
Design certified and agency listed:
Inspector friendly, peace of mind!
Compact, robust DZR brass body:
Foundation of a strong, corrosion resistant, durable fitting.
Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable
water and hydronic heating water distribution:
Quality engineered and manufactured.
Approved to be used underground and behind walls without access panels.
Designed for hydronic heating as well as potable water distribution.
Tee
Elbow
Straight
Coupling
Push the pipe and fitting together firmly with a twisting action until it clicks. Push the disconnect clip against the release collar and pull the pipe with a twisting action.
Allow at least 1" clearance between fittings for disconnection.
For Copper, CPVC or PEX Pipe
(Please consult with local plumbing codes concerning specific water heater piping requirements.)
Performance:
Maximum working pressure . . . . . . . . .200 psi
Maximum temperature . . . . . . . . . . . . .200°F (93°C)
Service . . . . . . . . . . . . . . . . . . . . . . . . .Potable water
Materials:
Body . . . . . . . . . . . . . . . . . . . . . . . . . . .DZR brass
O-ring . . . . . . . . . . . . . . . . . . . . . . . . . .EPDM
Grab ring . . . . . . . . . . . . . . . . . . . . . . .Stainless steel
Tube support liner . . . . . . . . . . . . . . . .Polysulfone
Finish:
Natural Brass or Chrome Plated
specification Data
certifications
The SharkBite
®
push-fit fittings have been design certified and listed to ASSE 1061/NSF 61.
The SharkBite
®
push-fit fittings are listed by IAPMO and are certified for potable and hydronic
heating water distribution (note: Glycol mixture for hydronics is not to exceed 50% concentration).
The SharkBite
®
push-fit fittings have been certified for underground applications and as a
manufactured joint without access panels and they meet UPC, IPC and cUPC requirements.
Mark pipe
approx. 1"
from end
The tube shall be inserted into the SharkBite
®
push-fit fitting in the first stage through a release collar
and then through a stainless steel grab ring. The grab ring has teeth that open out and grip onto the
tube. At the second stage the tube shall be pushed through an O-ring protector which aligns the tube.
A specially formulated EPDM O-ring shall be compressed between the wall of the fitting and the tube
before the end of the tube reaches the tube stop. Only when the tube has passed through the O-ring and
reached the tube stop shall a secure joint be created. The fitting shall be a SharkBite
®
push-fit fitting.