CONNECTION SYSTEM Reliance Worldwide USA AUGUST 2010 1-877-700-4242 www.sharkbitepro.
the sharkbite® Connection system includes push-fit and barb products and peX tubing. Contents Introduction and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 SharkBite Push-Fit Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Stops and Fixture Supply fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Push-fitting Tools . . . . . . . . . . . . . . . . . . .
TYPICAL SHARKBITE® APPLICATIONS add New service lines and equipment Use SharkBite® slip tees and other fittings to add a service line or install equipment such as expansion tanks. wet or dry repairs There’s no faster way to make a repair -- wet or dry. You can connect copper, CPVC or PEX pipe in any combination. Cut. Push. Done. Water Heater FLEX CONNECTORS Install or replace a water heater. It’s a breeze with SharkBite® flexible connectiors or the Water Heater installation kits.
THE SHARKBITE® CONNECTION SYSTEM Elbows sharkbite® push-fit products SharkBite continues to lead the industry with an expansive line of fittings, valves and other innovative, labor saving products for plumbing projects. SharkBite push-fit fittings are the fastest, easiest way to join copper, CTS CPVC and PEX in any combination. With no soldering or glue. Certified: 200 psi & 200o F (93o C). Use for new installation and repair of potable water distribution systems. See certifications & approvals on page 12.
LIGHTNING FAST. WON’T LET GO. End Stops Manifolds with SharkBite® Push-fit Branches SIZE P/N P/N (Lead Free) 3/8"(1/2" OD) 1/2" 5/8" 3/4" 1" U512 U514 U516 U518 U520 U512LF* U514LF – U518LF U520LF Manifolds are traditionally used in PEX systems, but this new SharkBite manifold will allow easy incorporation into copper or CPVC systems. Use SharkBite push fittings to install these manifolds anywhere in a plumbing system.
THE SHARKBITE® CONNECTION SYSTEM Stops & Fixture Supply Fittings Tools Angle Stop Safe Seal Tool SIZE P/N Deburring and depth gauge all in one. For 1/4", 1/2", 3/4" & 1" U702 PEX, copper and CPVC pipe.
LIGHTNING FAST. WON’T LET GO. Regulators Temperature Gauges The innovative, labor reducing SoloSet® EB-25, the EB-35, and the EB-45 pressure reducing regulators are all available with double union or direct SharkBite® connectors. The EB-25 is set at 45 psi and features a twist cap with a numerical pressure indicator for easy one-man adjustment. The EB-35 is factory set at 45 psi with an adjustment range of 20-90 psi depending on valve size.
THE SHARKBITE® CONNECTION SYSTEM PEX Without Oxygen Barrier - Straight Lengths and Coils SharkBite® PEX Tubing SharkBite® PEX tubing is a cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems and with an oxygen barrier for radiant floor and hydronic heating applications.
LIGHTNING FAST. WON’T LET GO. Tees SharkBite® PEX/Barb Products SIZE The PEX/Barb Connection System includes fittings, manifolds, valves, clamp rings, crimp rings and tools. Plus SharkBite PEX tubing in sizes and lengths for any job.
THE SHARKBITE® CONNECTION SYSTEM Swivel Fittings Plugs 3/8" 1/2" 3/4" 1" Swivel Adapters SIZE P/N P/N (Lead Free) 3/8"X1/2" FNPT 1/2"X1/2" FNPT 1/2"X3/4" FNPT 3/4"X3/4" FNPT 3/4"X1" FNPT 1" X 1" FNPT UC527 UC526 UC534 UC530 UC529* UC594 UC527LF UC526LF UC534LF UC530LF UC529LF* UC594LF UC531 UC532 UC531LF UC532LF UC512LF UC514LF UC518LF UC520LF Copper Stubout Elbow 1/2" X Closed (4"X8") 22791 3/8" X 1/2" (4"X4") 23069 1/2" X 1/2" (4"X4") 23070 Swivel Elbows 3/8" X 1/2" FNPT 1/2" X 1/2" FNPT UC5
LIGHTNING FAST. WON’T LET GO. Crimp Ring Removal Tool Clamp Rings 1/4" 3/8" 1/2" 5/8" 3/4" 1" – UC952 UC953 UC954 UC955 UC956 – – – – – – Use to remove 3/8", 1/2", 3/4" and 1" SharkBite® crimp rings. SIZE – P/N 23055 P/N (Lead Free) – PEX Tubing Cutter PEX Clamp Tool For use with SharkBite® Barb 3/8”, 1/2”, 3/4” and 1” fittings and SharkBite® PEX tubing. Use to cut 1/4", 3/8", 1/2", 3/4" and 1" SharkBite PEX tubing.
THE SHARKBITE® CONNECTION SYSTEM Certifications The SharkBite® push-fit fittings have been design certified and listed to ASSE 1061/NSF 61. The SharkBite® push-fit fittings are listed by IAPMO and are certified for potable and hydronic heating water distribution (note: Glycol mixture for hydronics is not to exceed 100% concentration).