How to Guide

Sales & Specifications • Issue Date December 2012 • Revision Date March 2017
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
EB-45 Double Union SharkBite
®
Pressure Regulating Valve
DESCRIPTION
The Cash Acme EB-45 Double Union SharkBite Pressure Regulating Valve (EB45-DUSB) is a
lead free* half-cartridge based pressure reducing and regulating valve with a bronze body. The
valve construction is similar to a traditional regulator in that it retains a separate spring chamber
and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based
valve.
The EB45-DUSB is assembled using modular construction methods and features union
SharkBite connections in 1/2" through 1" sizes. Connect the SharkBite pressure regulating
valve to copper tubing, and CTS CPVC and PEX in seconds with ease.
The EB45-DUSB is supplied by the factory with a standard delivery setting of 45 psi. The outlet
pressure can be adjusted from 10-70 psi without changing the spring. This valve is intended
for use where supply line pressure does not exceed 200 psi, and is suited for either cold or hot
(to 180°F) water service.
FEATURES AND BENEFITS
Modular Cartridge Design reduces the number of parts requiring service:
Quick and Easy Service/Repair.
Instant push-fit connections for increased ease of use:
No soldering, glue or tools required to make connection.
Rugged bronze body:
Superior reliability, improved user safety.
Compact pressure reducing valves:
Smaller installation footprint and economically priced.
Certified to ASSE Standard 1003, CSA Standard B356, and ASSE Standard 1061. Listed by
IAPMO and ASSE and certified lead free complying with NSF 372:
Inspector friendly for peace of mind.
Back-pass check mechanism integral with the cartridge:
No add-on or small parts, longer life and more reliable performance.
Every valve is tested for performance prior to shipping:
Specify and install with confidence.
Assembled and tested in the USA:
Prepared in our manufacturing plant in Cullman, Alabama.
SPECIFICATION
A pressure regulating valve shall be installed to reduce high supplies of incoming water
pressure. The valve shall be approved in accordance with ASSE standard 1003, CSA standard
B356 and IAPMO UPC. The valve shall have a bronze body, brass and stainless steel
internals, an EP diaphragm, stainless steel strainer screen, an inbuilt back-pass check, and
integral SharkBite push-to-connect ends. The valve shall be used on copper tubing, and CTS
CPVC and PEX. The valve shall be a Cash Acme EB-45 Double Union SharkBite Pressure
Reducing Valve.