Product Overview

Sales & Specifications • Issue Date September 2010 • March 2017
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
EB-45 Pressure Regulating Valve
DESCRIPTION
The EB-45 Series is a lead-free
1
half-cartridge based pressure reducing and regulating valve
with a bronze body. The valve construction is similar to a traditional regulator in that it retains a
separate spring chamber and adjusting screw, but offers the simplicity and maintenance
benefits of a cartridge based valve. The EB-45 is assembled using modular construction
methods and features end connections threaded for both FIP and union in ½” through 2” sizes.
A connection for a pressure gauge is also available for ¾” and 1" models.
The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi
1/2", 3/4", and 1"). The EB-45 pressure regulators are supplied by the factory with a standard
delivery setting of 45 psi. The outlet pressure can be adjusted from 10-70 psi without changing
the spring. This regulator is suited for either cold or hot (to 180°F) water service.
FEATURES AND BENEFITS
Modular Cartridge Design reduces the number of parts requiring service:
Quick and Easy Service/Repair.
Rugged bronze body:
Superior reliability, improved user safety.
Compact pressure reducing and regulating valves:
Designed for small and economic considerations.
Certified to ASSE Standard 1003 and CSA Standard B356. Listed by IAPMO and ASSE and
certified lead free complying with NSF 372:
Inspector friendly for peace of mind.
By-pass mechanism integral with the cartridge:
No add-on or small parts, longer life and more reliable performance.
Every valve is tested for performance prior to shipping:
Specify and install with confidence.
Assembled and tested in the USA:
Prepared in our manufacturing plant in Cullman, Alabama.
SPECIFICATION
A pressure regulating valve shall be installed to reduce high supplies of incoming water
pressure. The valve shall be approved in accordance with ASSE standard 1003, CSA standard
B356 and IAPMO UPC. The valve shall have a bronze body, brass and stainless steel
internals, an EP diaphragm, stainless steel strainer screen and an inbuilt back-pass check. The
valve shall be a Cash Acme EB-45.