Specification

Sales and Specifications Sheet • Issue April 2014
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
EB-45 Direct SharkBite
®
with Slip Feature
Pressure Regulating Valve
DESCRIPTION
The EB-45 Direct SharkBite with Slip Feature (EB45-SDSB) is a lead free* half-cartridge based
pressure reducing and regulating valve with a bronze body. The valve construction is similar to
a traditional regulator in that it retains a separate spring chamber and adjusting screw, but
offers the simplicity and maintenance benefits of a cartridge based valve.
The EB45-SDSB features integral SharkBite connections in 1/2" and 3/4" sizes along with an
added slip feature for easy installation. Connect the SharkBite pressure regulating valve to
copper tubing and CTS CPVC with ease. The added slip feature allows for simple replacement
of an existing regulator or allows installation in an existing line where there is little to no slack in
the pipe system.
These valves are supplied by the factory with a standard delivery setting of 45 psi but
the outlet pressure can be adjusted from 10-70 psi without changing the spring.
The EB45-SDSB is intended for use where supply line pressure does not exceed 200 psi
and is suited for either cold or hot (to 180°F) water service.
FEATURES AND BENEFITS
Modular cartridge design reduces the number of parts requiring service:
Quick and easy service and reparability.
Instant push-fit connections for increased ease of use:
No soldering, glue or tools required to make connection.
Utilizes a slip feature for easy installation:
Install quickly on existing copper and CTS CPVC pipe.
Rugged bronze body:
Superior reliability, improved user safety.
Compact pressure reducing valves:
Smaller installation footprint and economically priced.
Certified to ASSE Standard 1003, CSA Standard B356, and ASSE Standard 1061. Listed by IAPMO
and certified lead free complying with NSF 372:
Inspector friendly for peace of mind.
Back-pass check mechanism integral with the cartridge:
Allows water to flow back through the regulator in the event that outlet pressure exceeds inlet
pressure, as in the case of thermal expansion caused by water heating devices.
Every valve is tested for performance prior to shipping:
Specify and install with confidence.
Assembled and tested in the USA:
Prepared in our manufacturing plant in Cullman, Alabama.
SPECIFICATION
A pressure regulating valve shall be installed to reduce high supplies of incoming water pressure. The
valve shall be approved in accordance with ASSE standard 1003, CSA standard B356 and IAPMO
UPC. The valve shall have a bronze body, brass and stainless steel internals, an EP diaphragm,
stainless steel strainer screen, an inbuilt back-pass check, and integral SharkBite push-to-connect ends
with slip feature. The valve shall be used on copper and CTS CPVC pipe. The valve shall be a Cash
Acme EB-45 Direct SharkBite with Slip Feature.
24384-0045
24475-0045
Patent Pending