Table of Contents SYSTEM DATA SHEET ................................................................................................................................... 3 ENGINEERING SPECIFICATIONS .................................................................................................................... 4 THE SHARKBITE DESIGN (1/4” – 1”) .............................................................................................................. 7 WHY SHARKBITE? ...................................
SYSTEM DATA SHEET System Description The SharkBite Push-Fit quick-connect plumbing system is the easiest and most dependable way to join copper, CPVC or PEX pipe in any combination—with no soldering, clamps, unions or glue. Available in an assortment of over 200 fittings and sizes ranging from ¼” to 2” copper tube size (CTS). Applications Tubing: Hard drawn copper pipe Type K, L and M and annealed Type M not to exceed 3/8 nominal complying with ASTM B 88, PEX tubing complying with ASTM F 876 or CSA B137.
ENGINEERING SPECIFICATIONS The push-fit fitting shall be installed on hard drawn copper type K, L and M complying with ASTM B88, cross-linked polyethylene pipe (PEX) complying with ASTM F 876 or CSA B137.5 or CPVC piping complying with ASTM D 2846 or CSA B137.6. The fitting shall be made of lead free dezincification brass and compliant with ASSE 1061, NSF/ANSI 61 and NSF/ANSI 372.
1.5 WARRANTY A. SharkBite Push-Fit Fittings have a 25 year limited warranty from point of sale. B. All products must be installed in accordance with all applicable codes and in accordance with any local, state, provincial or federal requirements. C.
PART 3: EXECUTION 3.1 EXAMINATION A. If installing PEX pipe, ensure that the tube liner has been installed. B. Ensure the fitting is free from any damage, including but not limited to damaged or missing O-ring, cracked brass forging or deformed grab ring. 3.2 PREPARATION A. The tubing shall be cut square to ensure a proper connection. B. The tubing shall be free of dirt, debris or scale buildup. Any burrs shall be removed using a deburring tool. C.
THE SHARKBITE DESIGN (1/4” – 1”) The SharkBite Fitting incorporates a number of unique and patented features. WHY SHARKBITE? Instant push-fit connection for increased ease-of-use: o No soldering, clamps, unions, or glue required. Fittings certified to 200 PSI and 200°F (93°C): o Proven durability and quality. Fits copper tubing, and CTS CPVC and PEX: o Connects all three types in any combination.
CONNECTING A SHARKBITE FITTING 1. Cut the desired length of pipe. Make sure cuts are square and even. 2. Deburr the end of the pipe to remove any sharp edges. This will ensure that the o-ring will not be damaged upon insertion of the pipe. 3. Using a depth gauge, mark the pipe. A 1” mark on the pipe can be used as a guideline. Proper insertion depths are listed below. This will let you know if your connection is successful. Pipe Size Insertion Depth 1/4” 3/8” 1/2” 5/8” 3/4” 1” 0.813” 0.875” 0.
DISCONNECTING A FITTING With the Disconnect Clip 1. Place the SharkBite disconnect clip around the tube with the non-branded side against the release collar. 2. Push the clip against the release collar and pull the tube with a twisting action to release the tube. With Disconnect Tongs 1. Place the teeth around the fitting assembly. The fork end with the SharkBite brand logo should be positioned around the tube and the other end around the neck of the fitting. 2.
SHARKBITE SLIP PRODUCTS Slip fittings simplify repair by doing the job that two couplings and extra pipe would do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair. Cut out the section of the pipe needing repair (no more than 2” in length). Using the SharkBite Deburring & Depth Gauge, clean the edges of the copper pipe.
SHARKBITE SLIP PRODUCTS In addition to slip coupling and tees, we also have slip ball valves and slip pressure regulators available to ease installation woes. To see an installation video on installing a slip fitting, please visit: http://www.youtube.com/watch?v=lgdBv5BK5dQ&list=PL0ABAD0AF076CFA60&feature=c4-overview-vl SHARKBITE FOR CONCEALED AREAS SharkBite fittings can be utilized in underground applications and as manufactured joints without access panels, per IAPMO Certificate of Listing File No.
DIMENSIONS 12 8/6/2014
PRESSURE LOSS AND FLOW RATES 13 8/6/2014
8/6/2014
8/6/2014
ASSE 1061 TESTING Below are some of the testing that SharkBite fittings Hydrostatic Burst: Fittings and pipe assembled and raised to min burst pressures at temperatures below: PEX Nominal Tubing Size in. 1/4 PEX 1/2 PEX 5/8 and larger PEX PSI @ 73.4 ˚F PSI @ 180 ˚F 752 480 475 336 215 210 Hydrostatic Sustained Pressure: Fittings and pipe assembled and raised to min burst pressures at temperatures below: PEX Nominal Tubing Size in.
Thermo-Cycling: Fittings and pipe assembled and immersed into varying temperatures.
THE SHARKBITE 2XL DESIGN (1-1/4” – 2”) SharkBite Logo EPDM O Ring PPSU Locking Ring Nylon Disconnecting Ring Lead Free DZR Body 316 Stainless Steel Grab Ring 18 8/7/2014
WHY SHARKBITE 2XL? Quick Connect: o No tools, soldering, clamps, unions or glue required. Cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time. Quick Disconnect: o Disconnect in seconds by sliding the De-Mount Tool down the pipe to engage the demount lugs and rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe.
HOW TO MAKE A SHARKBITE 2XL CONNECTION 1. Cut copper, CPVC or PEX using a quality tuber or pipe cutter with a sharp blade. 2. Remove burrs and ensure pipe surface is free of scratches and any debris. It is critical that pipe be marked with the correct insertion depth as listed below: 1-1/4" Pipe Insertion Depth = 2" 1-1/2" Pipe Insertion Depth = 2-1/4" 2" Pipe Insertion Depth = 2-1/2" 3. Align pipe with the fitting, insert pipe while rotating either pipe or fitting. 4.
DISCONNECTING A SHARKBITE 2XL CONNECTION 1. Place the Shark Shifter De-Mount Tool on the pipe just above the connection. Then slide the tool down to engage lugs on the head of the fitting. 2. Rotate the Shark Shifter De-Mount Tool clockwise to lock onto the lugs. This will lock the Shark Shifter De-Mount Tool in place. 3. Rotate the Shark Shifter De-Mount Tool clockwise to lock onto the lugs. This will lock the Shark Shifter De-Mount Tool in place.
SHARKBITE 2XL DIMENSIONS 22 8/6/2014
SHARKBITE 2XL PRESSURE LOSS AND FLOW RATES 23 8/6/2014
8/6/2014
8/6/2014
SHARKBITE PEX TUBING SharkBite PEX tubing is a cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red) and with an oxygen barrier for radiant floor and hydronic heating applications (available in orange).
PEX PIPE SPECS AND DIMENSIONS Nominal Tubing Size Model ID Length OD FT M Bend Radius Package Weight mm gal ltrs lbs kgs 127 0.96 3.63 5.5 2.5 5 127 0.96 3.63 14.5 6.6 152.4 5 127 0.96 3.63 24 10.9 100 30.48 7 178 1.9 7.19 10.5 4.8 22 300 91.44 7 178 1.9 7.19 31.5 14.4 7/8 22 500 152.4 7 178 1.9 7.19 45 20.4 25 1-1/8 29 100 30.48 10 254 3.1 11.73 18 8.2 1 25 1-1/8 29 300 91.44 10 254 3.1 11.73 54 24.
Nominal Tubing Size Model ID in Length OD mm in mm FT Bend Radius M in Fluid Capacity Per 100’ Package Weight mm gal ltrs lbs kgs White PEX (Coil) U880W300 1 25 1-1/8 29 300 91.44 10 254 3.1 11.73 54 24.6 U880W500 1 25 1-1/8 29 500 152.4 10 254 3.1 11.73 90 40.8 U885W100 1-1/4 31.75 1-3/8 35 100 30.48 7 175 4.67 17.68 25 11.34 U890W100 1-1/2 38.1 1-5/8 41 100 30.48 8 206 6.5 24.61 35 15.88 U895W100 2 50.8 2-1/4 54 100 30.
PROJECT PROFILE Soleil Skyscraper Location: Brisbane, Australia Height: 797 FT # of Floors: 74 Architect: DBI Design Developer: Meriton Group Main Contractor: Karimbla Building Services (Meriton Subsidiary) Plumbing Contractor: Isle Plumbing Product Used: SharkBite Pipes and Fittings 29 8/7/2014
PROJECT PROFILE Infinity Tower Location: Brisbane, Australia Height: 817 FT # of Floors: 81 Developer: Meriton Group Main Contractor: Meriton Group Plumbing Contractor: Isle Plumbing Product Used: SharkBite Pipes and Fittings 30 8/7/2014
IAPMO RESEARCH AND TESTING, INC. 5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards.
Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025. Products are in compliance with the following code(s): Uniform Plumbing Code (UPC®) National Plumbing Code of Canada International Plumbing Code (IPC®) Products are in compliance with the following standard(s): ASSE 1061-2011 MODELS: Note: The requirements of Section 609.3.
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards.
IAPMO RESEARCH AND TESTING, INC. 5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards.
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards.
WARRANTY LIMITED WARRANTY SharkBite® And Cash Acme® Products WHAT DOES THIS WARRANTY COVER? HOW DO YOU GET SERVICE? Subject to conditions outlined in this statement, RWC (in the USA, Reliance Worldwide Corporation and in Canada, Reliance Worldwide Corporation (Canada) Inc.
HOW LONG DOES THE LIMITED WARRANTY COVERAGE LAST? CATEGORY SharkBite Universal Brass Push-To-Connect Fittings And SharkBite 2XL Large Diameter Push-To-Connect Fittings SharkBite PEX Pipe SUBCATEGORY WARRANTY PERIOD (FROM COMMENCEMENT DATE) Valves with SharkBite PushTo-Connect Connections Valves with SharkBite Push-ToConnect Connections Continued Shall be used with: Copper–ASTM B 88 hard drawn copper tube K, L, and M PEX–ASTM F876/CSA B137.5 CPVC–ASTM D2846 or CSA B137.
10/9/2015
