How to Guide

8
CONNECTING A SHARKBITE FITTING
1. Cut the desired length of pipe.
 Make sure cuts are square and even.
2. Deburr the end of the pipe to remove any
sharp edges.
 This will ensure that the o-ring will not
be damaged upon insertion of the pipe.
3. Using a depth gauge, mark the pipe.
 A 1” mark on the pipe can be used as a
guideline. Proper insertion depths are
listed below.
 This will let you know if your
connection is successful.
Pipe Size
Insertion Depth
1/4”
0.813”
3/8”
0.875”
1/2”
0.938”
5/8”
1.125”
3/4”
1.125”
1”
1.313”
4. Push the pipe into the fitting.
 The mark you made on the pipe should
rest against the edge of the fitting.
8/6/2014